23
°
Connecting Your Equipment
Phones Jacks
Here you can connect stereo headphones.
This unit has two headphone jacks,
two people can also use headphones
simultaneously.
A Headphones 3D Ambience effect will be
applied, producing the sensation that the
sound is emanating from the piano itself
even when using headphones.
* The Headphones 3D Ambience effect applies only to piano sounds;
it does not apply to other sounds.
* You can also turn the Headphones 3D Ambience effect off (p. 6).
* You can use the [Ambience] button to adjust the Headphones 3D
Ambience effect.
Input Jack
By connecting an audio player or other audio playback device here,
you can play back the sound of the audio playback device via the unit.
Use the Input Volume (p. 18) to adjust the volume of the device that’s
connected to the Input jack.
Output Jacks
If you connect these jacks to amplified speakers, the sound of the unit
will be heard through them.
* Before turning off the power of the unit, you
must first turn off the power of the devices that
are connected to the Output jacks.
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
USB Memory Port
You can do the following things using a USB flash
drive.
5
WAVE files or MIDI files (SMF) data copied from your
computer can be played back by the unit.
5
You can make audio recordings of your performances on
the unit.
5
The audio recordings of songs that you’ve made can be
played on your computer.
* Carefully insert the USB flash drives all the way in—until it is firmly
in place.
* Never turn off the power or disconnect a USB flash drive or the
power cord while the USB memory access indicator is blinking.
* Use a USB flash drive sold by Roland. We cannot guarantee
operation if any other USB flash drive is used.
USB Computer Port
If you use a commercially available USB
cable to connect the unit’s USB Computer
port to your computer’s USB connector,
you’ll be able to do the following things.
5
SMF data played back by MIDI-compatible
software can be sounded by the unit.
5
MIDI data can be transferred between the unit and your sequencer
software, opening up a wide range of possibilities for music
production and editing.
Summary of Contents for LX-17
Page 30: ...5 1 0 0 0 4 6 7 7 3 0 1...
