Roland LX-17, Owner'S Manual

Page: 14 / 30

14
Advanced Operation
˙ Saving Your Performance Settings (Registration)
Tone settings and settings such as Dual Play or Split Play can be
saved and recalled easily.
Such settings are called a “registration.”
You can save a total of 25 registrations, five each in buttons [1]–[5].
These 25 registrations are collectively called a “registration set.”
=
Registration set
25 registrations
1-1 2-1 3-1 4-1 5-1
1-5 2-5 3-5 4-5 5-5
Settings that are saved in a registration
Setting Page
Ambience p. 6
Rotary Speed p. 6
Key Touch p. 6
Transpose p. 6
The selected tone (including Split or Dual tones) p. 6
Split on/off p. 7
Split point p. 7
Left Shift p. 7
Dual on/off p. 7
Tone 2 Shift p. 7
Balance (Split, Dual) p. 7
Twin Piano on/off p. 7
Twin Piano Mode p. 7
Damper Pedal Part p. 19
Center Pedal p. 19
Left Pedal p. 19
MIDI Transmit Ch p. 20
Recalling a Registration
1.
Press the [Registration] button.
2.
Press a number button ([1] to [5]) to choose the location
where the desired registration is saved.
3.
Press the [–] [+] buttons to select the registration variation.
The settings change accordingly.
MEMO
You can also use a pedal to recall registrations (p. 19).
Saving Current Settings into a Registration
NOTE
When you save a registration into a location, it will overwrite any
registration already stored at that location.
1.
While holding down the [Registration] button, press a
button from [1] to [5] to select a registration and then press
the [–] [+] buttons to select a registration variation.
2.
Rename the registration.
[
K
] [
J
] buttons
Select the position at which you want to change
the character.
[–] [+] buttons Change the character.
If you decide to cancel, press the [
u
] (Exit) button.
3.
Press the [
s
] (Enter) button.
The registration is saved.
NOTE
Never turn off the power while the screen indicates “Executing...”