Roland LV-290, User Manual

Page: 134 / 216

132
5.2.3.7 LV-290 Printer Driver >> Stamp Page
Producing stamps require different operational steps than your standard engraving or cutting jobs. The
Stamp page offers dynamic options allowing you to customize your stamp production process.
NOTE
The Stamp page will only appear and be accessible when you have selected the Stamp Mode from
the Options Page.
Tip
Functions located on the other pages that are useful when making a stamp: Set Shoulder, Pitch,
Border, Invert, and Mirror.
Pitch (Stamp Page)
Your stamp will be a reversed image composed of engraved depressions and ridges. Think of these ridges as
the “contact sections” of the stamp. If the ridges of these contact sections are too thin, they may break. The
Pitch setting allows you to increase the width of the ridge base, hence creating more stable “contact sections”
and longer lasting stamp. The pitch value setting allows you to adjust the base width of the ridge. Broad pitch
gives the maximum amount of support for each ridge. Experiment with different pitch value settings in order
to produce the stamp that is best suited for your application.
Bridge: contact area of the
stamp
Base of bridge (pitch)
Slope of bridge (shoulder level)