Roland LV-290, User Manual

Page: 104 / 216

102
Navigating to this page:
Main Work Page
Press F4
Functions Page
Select <Advanced
Options> from the menu
Advanced Option Page
Select <SmartGUARD>
from the menu
SmartGUARD Page
Advanced Option- SmartGUARD Page
After optional SmartGUARD hardware installation, please enter the function menu on the control panel to
enable the SmartGUARD fire alarm. Note SmartGUARD fire alarm system is not a fire extinguisher, but a fire
detecting and alarm system.
SmartGUARD Enable/ Disable:
Press directional key (Left or Right) to enable the SmartGUARD device or disable it.
Sensitivity:
Press directional key (left or right) to set the sensitivity of SmartGUARD. There are seven sensitivity settings that
can be selected. Sensitivity defines the delay time from when a fire is detected until the fire alarm alerts user, and
automatically stop laser firing. For example, if the sensor delay switch is set to the 3-second position, the
SmartGUARD will start an alarm and automatically stop laser firing after detecting a fire for 3 seconds.
Stow Carriage:
This function will decide if the lens carriage stay in the last position (set to <NO>) or move to the opposite
direction (up or down) when fire alarm is initiated. The default is <YES>, the lens carriage will move to opposite
direction when a fire detected.
SmartGUARD Setting Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
 /  Directional Scroll through the menu selections
 /  Directional Adjust the value for that selection
Start / Stop Back to Main Work Page
Auto Focus Initiate the auto focus function
 /  Manual Focus Buttons Manually adjust the height of the work table (Z-axis)