58
Chapter 2 Automatic Accompaniment
Chapter 2
Starting and Stopping the Accompaniment
Pressing the One Touch Program [Arranger] button activates Sync Start for the
accompaniment (which starts the accompaniment simultaneously when you play on
the lower section of the keyboard), and automatically sets an appropriate intro for
the accompaniment. You can also change the way the accompaniment starts and
stops.
fig.panel2-6
■
Having the Accompaniment Start Simultaneously
When You Play the Keyboard (Sync)
1.
Press the [Intro/Ending] button and [Start/Stop] button simultaneously,
causing the indicators of both buttons to flash.
The Sync Start settings go into effect.
2.
Play a chord on the lower-part of keyboard.
As you play the keys, the intro and accompaniment begins simultaneously.
❍
Changing the intro
When set for Sync Start (the indicators of both the [Intro/Ending] button and [Start/
Stop] button are flashing), you can use the following procedure to change the intro,
or prevent the intro from playing.
Starting without an intro
Press the [Intro/Ending] button and watch the indicator go out.
Now when you play a chord with the keyboard, the accompaniment starts without
the intro.
To start with a short intro added
On the Basic screen, touch the Intro/Ending Type <2>.
fig.d-intro2.eps_60
Now when you specify a chord with the keyboard, a short intro is played, and the
accompaniment starts.
Sync Start is set immediately
after the One Touch Program
[Arranger] button is pressed.
KR-7_5_e.book 58 ページ 2004年7月7日 水曜日 午前10時3分