127
Chapter 6 Creating and Editing Songs
Chapter 6
■
Copying Rhythm Patterns to
Create Rhythm Parts
The KR-7/5 features numerous internal rhythm patterns.
You can copy these rhythm patterns to create a rhythm part.
→
For more information about the name of Rhythm Patterns,
please refer to “Rhythm Pattern List” (p. 187).
At Step 3 of “Selecting the editing function” (p. 125), select
<Copy>.
For more about ordinary copying, please refer to “Copying
Measures (Copy)” (p. 126).
Select “Rhythm Pattern” as the <Src>.
This makes the setting for copying a built-in Rhythm Pattern.
fig.d-e-copy2.eps_50
• The rhythm pattern’s name and measure count are
indicated in the <From> column.
• The <Dst> is fixed at “Part 10.”
• When the <Src> is switched to something other than
“Rhythm Pattern,” the KR-7/5 is set to carry out normal
copying.
Press the [
(Play/Stop)] button to play back and
confirm the rhythm pattern. The rhythm pattern stops when
you press the [
(Play/Stop)] button once more.
■
Correcting Timing
Discrepancies (Quantize)
You can correct for timing discrepancies in a recorded
performance by automatically aligning the music with the
timing you specify. This is called “Quantizing.”
As an example, let’s say that the timing of some quarter-
notes in a performance is a little off. In this case, you can
quantize the performance with quarter-note timing, thus
making the timing accurate.
fig.e-quantize.e
At Step 3 of “Selecting the editing function” (p. 125), select
<Quantize>.
A screen like the one shown below appears.
fig.d-e-quant.eps_50
When finished with the Quantize settings, return to the Song
Edit screen.
Mode
Data can be copied in the following three ways:
Replace
If there is a performance recorded at the copy
destination, this previous recording is erased,
and the copied data is written in its place.
Mix
If there is a performance recorded at the copy
destination, the copied data is layered over the
previous recording. If the Tones used for the
copy source and copy destination are different,
the copy-destination Tone is used.
Insert
If there is a performance recorded at the copy
destination, the copied portion is inserted with-
out erasing the previous recording. The song is
lengthened by the number of inserted mea-
sures.
Item
Content
Item
Content
From
Measure number of the first measure of the
segment to be quantized
For
Number of measures to be quantized
Tr/Pt
Track button or part number to be
quantized
Choosing “All” quantizes the same passage
in all Parts.
Resolu-
tion
Quantization timing
Select one of the following values
1/2 (half note), 1/4 (quarter note),
1/6 (quarter-note triplet), 1/8 (eighth note),
1/12 (eighth-note triplet), 1/16 (sixteenth
note), 1/24 (sixteenth-note triplet),
1/32 (thirty-second note)
1
2
3
4
1
2
3
4
Example: Quarter-note resolution
Example: Sixteenth-note resolution
Actual note data
Note data after quantization
Actual note data
Note data after quantization
KR-7_5_e.book 127 ページ ２００４年７月７日 水曜日 午前１０時３分
