68
Practice Functions
Match the Tempo Before You Begin
Playing (Count In)
When you’re playing along with a song, you can listen to the tempo before you start
playing by adding a count-in.
This audible count before the song playback is called a “Count-In.”
fig.panel3-3
1.
Press the [Count/Marker] button and watch the indicator light up.
The following “Count settings screen” appears.
fig.d-cntin.eps_60
2.
Touch <Count Mode>
to set this to “Count In” or “Count In/
Down.”
With this setting, two measures count down before the song playback starts.
Cancelling the Count In
1.
Press the [Count/Marker] button so its indicator is turned off.
By touching <Exit> instead of the [Count/Mark] button, you can close the Count
settings screen without cancelling the count.
You can have a count sound be
played before the song starts
playing back by holding down
the [
(Reset)] button while
you press the [(
)Play/
stop] button.The status of the
Count settings won’t be
affected by your use of this
procedure.
For more about other settings
on the Count settings screen,
refer to “Changing the Settings
for the Count” (p. 131).
KR105.book Page 68 Tuesday, June 7, 2005 5:25 PM
