Roland Kiwitechnics KIWI-SJX, Manual, Page: 12 / 89

12
CANCEL BUTTON The CANCEL button will exit most
operations. The Arp & Seq Step Timing
button edits will need to be exited via the
same Step Timing button. In the MKS-70 this button is shared
with the Master Tune button.
MIDI PANIC
BUTTON The MIDI PANIC will stop all sound from
the Kiwi-SJX.
This button is also used to put the JX-10
version of the Kiwi-SJX into update mode.
This is done by holding down this button
during power on.
In the MKS-70 version of the Kiwi-SJX
the SHIFT button also acts as the MIDI
PANIC. A MIDI PANIC will occur if the
Shift button is pressed twice with no
other button presses.
MASTER TUNE
BUTTON The MASTER TUNE button allows the
synth global fine tune to be set. In the
MKS-70 version the SHIFT button must
be pressed first.
The Tune is changed by using the Alpha
Dial.
The Master Tune can be set from A395 to
A485.
Press Master Tune Again or CANCEL to
exit master tune mode.
In the JX-10 version to perform a
FACTORY RESET hold WRITE and
MASTER TUNE down as you power
on the Kiwi-SJX.
In the MKS-70 version the WRITE and
CHORD buttons must be held down
as you power on the synth.
Warning – this will clear all memory
in the synth and there will be no
confirmation.
www.kiwitechnics.com JX-SJX Upgrade User Manual v100