Roland Kiwitechnics KIWI-SJX, Manual, Page: 81 / 89

81
Table 1.0 Command ID Data Byte Data Type
Byte details
7 ------- 0
Data Details
$b9 (185)=Upper DCO1 Initial PWM
Amount
0xxxxxxx x = Range $00-$7f (0-127)
$ba (186)=Upper DCO2 DYN Amount 0xxxxxxx x = Range $00-$7f (0-127)
$bb (187)=Upper DCO2 Control 0ww0yyzz zz = DCO1Env(00=Env1,01=Env2,10=Env3)
yy = DCO1LFO(00=LFO1,01=LFO2,10=LFO3)
ww = DCO1PWM Src(00=Env1,01=Env3,10=LFO2,11=LFO3)
$bc (188)=Upper Detune Initial
Amount
0xxxxxxx x = Range $00-$7f (0-127)
$bd (189)=Upper DCO1 Initial Mix
Level
0xxxxxxx x = Range $00-$7f (0-127)
$be (190)=Upper DCO2 Initial Mix
Level
0xxxxxxx x = Range $00-$7f (0-127)
$bf (191)=Upper DCO2 Mix DYN Amount 0xxxxxxx x = Range $00-$7f (0-127)
$c0 (192)=Upper DCO2 Initial Mix
Env Amount 0xxxxxxx x = Range $00-$7e (-63 → 0 → +63) - ($7f=$7e)
$c1 (193)=Upper DCO2 Mix Control 000000zz zz = MixEnv(00=Env1,01=Env2,10=Env3)
$c2 (194)=Upper HPF Initial Level 000000xx xx = 0-3
$c3 (195)=Upper VCF Initial Cutoff
Hi 000xxxxx
$c4 (196)=Upper VCF Initial Cutoff
Lo 0yyyyyyy Hi & Lo are combined to make single 12 bit command.
00 0yyyyyyy = 0000xxxx xyyyyyyy
x = Range $0-$fff (0-4095)
$c5 (197)=Upper VCF Initial
Resonance Hi
000xxxxx
$c6 (198)=Upper VCF Initial
Resonance Lo
0yyyyyyy Hi & Lo are combined to make single 12 bit command.
00 0yyyyyyy = 0000xxxx xyyyyyyy
x = Range $0-$fff (0-4095)
$c7 (199)=Upper VCF Initial LFO
Amount 0xxxxxxx x = Range $00-$7e (-63 → 0 → +63) - ($7f=$7e)
$c8 (200)=Upper VCF Initial ENV
Amount 0xxxxxxx x = Range $00-$7e (-63 → 0 → +63) - ($7f=$7e)
$c9 (201)=Upper VCF Initial KEY
Amount 0xxxxxxx x = Range $00-$7e (-63 → 0 → +63) - ($7f=$7e)
$ca (202)=Upper VCF DYN Amount 0xxxxxxx x = Range $00-$7f (0-127)
www.kiwitechnics.com JX-10/MKS-70 Upgrade User Manual v100