Roland Jupiter-Xm, Owner'S Manual

Page: 15 / 27

15
Splitting the Keyboard to Play Different
Sounds
(Split)
1.
Press the [FUNCTION] button to make it light.
Chooses function mode.
2.
Press the [15] button .
Split turns on. The part 1 tone sounds in the right-hand region of
the keyboard, and the part 2 tone sounds in the left-hand region.
To return to the original state, press the
[15] button once again in
function mode.
* If you want to change the split point, enter function mode, then hold
down the [15] button and press the desired key; alternatively, you can use
SCENE ZONE EDIT to set the KEY RANGE. For details, refer to “Reference
Manual” (PDF).
Layering Two Sounds
(Dual)
1.
Press the [FUNCTION] button to make it light.
Chooses function mode.
2.
Press the [16] button .
Dual is turned on. This layers the part 1 tone with the part 2 tone,
so that they are heard together.
To return to the original state, press the
[16] button once again in
function mode.
* If you hold down the [SHIFT] button and press the [DUAL] button to turn
Dual on, settings are automatically made so that part 1 is output from L
and part 2 is output from R.
Transposing the Keyboard in Octave
Units
(Octave)
1.
Press the OCTAVE [DOWN] [UP] button .
To return to the original state, press the OCTAVE [DOWN] and [UP]
buttons .
Transposing the Keyboard in Semitone
Steps
(Transpose)
1.
Hold down the [TRANSPOSE] button and press the OCTAVE
[DOWN] [UP] button .
To return to the original state, hold down the [TRANSPOSE] button
and press the OCTAVE [DOWN] button and [UP] button .
Playing Single Notes
(Monophonic)
1.
Press the [FUNCTION] button to make it light.
Chooses function mode.
2.
Press the [11] button .
Mono turns on.
To return to the original state, press the
[11] button once again in
function mode.
Layering the Same Tone to Thicken the
Sound
(Unison)
1.
Press the [FUNCTION] button to make it light.
Chooses function mode.
2.
Press the [12] button .
Unison turns on.
To return to the original state, press the
[12] button once again in
function mode.
Preventing Dynamics Changes in Your
Performance
(Velocity Off)
1.
Press the [FUNCTION] button to make it light.
Chooses function mode.
2.
Press the [13] button .
The velocity off setting is enabled. Your keyboard dynamics will not
affect the sound.
To return to the original state, press the
[13] button once again in
function mode.
Smoothly Changing the Pitch
(Portamento)
1.
Press the [FUNCTION] button to make it light.
Chooses function mode.
2.
Press the [14] button .
Portamento turns on.
To return to the original state, press the
[14] button once again in
function mode.
* In function mode, you can hold down the [SHIFT] button and press the
[14] button to access the portamento time setting screen.
Using Performance Functions