Roland JUNO-X Reference Manual Download Page 22

Page: 22 / 56

Scene Edit/Part Edit

Detailed settings can be made using the edit pages, which you can access from the SCENE TOP screen by using the [

] [

] buttons.

SCENE

ARP PART

EDIT

ARP

COMMON

EDIT

SCENE TOP

screen

SCENE

PART

MODEL

BANK

SCENE

COMMON

EDIT

SCENE PART

EDIT

SCENE ZONE

EDIT

SCENE PART

MFX

SCENE

EFFECT: Dly

SCENE

EFFECT: Rev

SCENE

EFFECT: Cho

SCENE

EFFECT: OD

SCENE

SELECT

[ENTER] (INIT) button

[EXIT] button

* Press the [EXIT] button to return to the SCENE TOP

screen.

Configuring Scene Common Settings

(Scene Edit)

The scene edit pages let you make settings that are common to the scene.

1 .

Press the [SCENE] button .

The SCENE TOP screen appears.

MEMO

If you hold down the [SCENE] button and press the [PART/FUNC] button, the part list screen appears.

2 .

Use the [

] [

] buttons to move to the scene edit page for the item that you want to edit .

3 .

Use the [

SELECT

] knob to select the parameter that you want to edit, and use the [- VALUE +] knob to change

the value .

For details, refer to “Parameter Guide” (PDF).

4 .

If you want to save the setting, execute the Scene Write operation .

* If you want to save a tone individually, use the tone write operation (p. 26).

4-1 .

Hold down the [SHIFT] button and press the [MENU] (WRITE) button.

The WRITE MENU screen appears.

4-2 .

Use the [

SELECT

] knob to select “SCENE,” and then press the [ENTER] (INIT) button.

4-3 .

Use the [

SELECT

] knob and the [- VALUE +] knob to select the save-destination, and then press the [ENTER] (INIT) button.

To rename the scene that’s being saved, use the [

] [

] buttons to move the cursor and use the [- VALUE +] knob to select the characters.

4-4 .

Press the [ENTER] (INIT) button.

4-5 .

To execute, press the [ENTER] (INIT) button.

Basic settings related to I-Arpeggio

(ARP COMMON EDIT)

These are I-Arpeggio basic settings. You can also specify the rhythm

pattern that’s used for arpeggio performance, and the keyboard

region that is detected by I-Arpeggio.

Basic settings for scenes

(SCENE COMMON EDIT)

These are basic settings for scenes.
These settings let you assign functions to controllers such as the

buttons or knobs, and configure the settings for controlling an

external device.

Delay settings

(SCENE EFFECT: Dly)

These are settings for the delay that is used in common by all parts.

* These settings are valid only if the “SYSTEM EFFECT: Dly” source is set to

“SCENE.”

“Editing the System Settings (System)” (p. 43)

Reverb settings

(SCENE EFFECT: Rev)

These are settings for the reverb that is used in common by all parts.

* These settings are valid only if the “SYSTEM EFFECT: Rev” source is set to

“SCENE.”

“Editing the System Settings (System)” (p. 43)

Editing a Scene

(SCENE EDIT)

Summary of Contents for JUNO-X

























































Search results

Summary of Contents for JUNO-X

Reviews:

Related manuals for JUNO-X

Brands by name

Popular brands

Roland JUNO-X, Reference Manual

Search results

Summary of Contents for JUNO-X

Reviews:

Related manuals for JUNO-X

Brands by name

Popular brands