12
Getting Ready to Play
Using the Built-In Speakers
This unit contains built-in stereo speakers. If the built-in speakers are
turned on, you can play sound from this unit.
Speaker locations
1 .
Press the [MENU] (WRITE) button .
2 .
Use the [
Ç
SELECT
É
] knob to select “SYSTEM,” and
then press the [ENTER] (INIT) button .
3 .
Use the [
Ç
SELECT
É
] knob to select “Speaker Sw,” and
use the [- VALUE +] knob to specify “ON” or “AUTO .”
Parameter
[
Ç
SELECT
É
] knob
Value
[- VALUE +] knob
Explanation
Speaker Sw
OFF
Sound is not output from the speakers.
ON
Sound is output from the speakers.
AUTO
When headphones are connected, the
sound is output through the headphones;
and when headphones are not
connected, the sound is output through
the speakers.
4 .
To save the settings, hold down the [SHIFT] button
and press the [MENU] (WRITE) button .
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
5 .
To execute, press the [ENTER] (INIT) button .
