46
MFX/Chorus/Reverb Parameters
23: CHORUS
This is a stereo chorus. A filter is provided so that you can adjust the timbre of the
chorus sound.
L in
R in
Chorus
Chorus
L out
R out
2-Band
EQ
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
Parameter
Value
Explanation
Filter Type
Type of filter
OFF
No filter is used
LPF
Cuts the frequency range above the Cutoff Freq
HPF
Cuts the frequency range below the Cutoff Freq
Cutoff Freq
200–8000[Hz]
Center frequency when using the filter to cut a
specific frequency range
Pre Delay
0.0–100[msec]
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Rate #
0.05–10.00[Hz], note
Frequency of modulation
Depth
0–127
Depth of modulation
Phase
0–180[deg]
Spatial spread of the sound
Low Gain
-15–+15[dB]
Gain of the low range
High Gain
-15–+15[dB]
Gain of the high range
Balance #
D100:0W–D0:100W
Volume balance between the direct sound (D)
and the chorus sound (W)
Level
0–127
Output level
24: FLANGER
This is a stereo flanger (The LFO has the same phase for left and right.).
It produces a metallic resonance that rises and falls like a jet airplane taking off or
landing. A filter is provided so that you can adjust the timbre of the flanged sound.
R in
R out
L in
L out
Flanger
Feedback
Feedback
Flanger
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Parameter
Value
Explanation
Filter Type
Type of filter
OFF
No filter is used
LPF
Cuts the frequency range above the Cutoff Freq
HPF
Cuts the frequency range below the Cutoff Freq
Cutoff Freq
200–8000[Hz]
Center frequency when using the filter to cut a
specific frequency range
Pre Delay
0.0–100[msec]
Adjusts the delay time from when the direct
sound begins until the flanger sound is heard.
Rate #
0.05–10.00[Hz], note
Frequency of modulation
Depth
0–127
Depth of modulation
Phase
0–180[deg]
Spatial spread of the sound
Feedback #
-98–+98[%]
Adjusts the proportion of the flanger sound that
is fed back into the effect.
Negative (-) settings will invert the phase.
Low Gain
-15–+15[dB]
Gain of the low range
High Gain
-15–+15[dB]
Gain of the high range
Balance #
D100:0W–D0:100W
Volume balance between the direct sound (D)
and the flanger sound (W)
Level
0–127
Output level
25: STEP FLANGER
This is a flanger in which the flanger pitch changes in steps. The speed at which the
pitch changes can also be specified in terms of a note-value of a specified tempo.
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Step Flanger
Step Flanger
Parameter
Value
Explanation
Filter Type
Type of filter
OFF
No filter is used
LPF
Cuts the frequency range above the Cutoff Freq
HPF
Cuts the frequency range below the Cutoff Freq
Cutoff Freq
200–8000[Hz]
Center frequency when using the filter to cut a
specific frequency range
Pre Delay
0.0–100[msec]
Adjusts the delay time from when the direct
sound begins until the flanger sound is heard.
Rate #
0.05–10.00[Hz], note
Frequency of modulation
Depth
0–127
Depth of modulation
Phase
0–180[deg]
Spatial spread of the sound
Feedback #
-98–+98[%]
Adjusts the proportion of the flanger sound that
is fed back into the effect.
Negative (-) settings will invert the phase.
Step Rate #
0.10–20.00[Hz], note
Rate (period) of pitch change
Low Gain
-15–+15[dB]
Gain of the low range
High Gain
-15–+15[dB]
Gain of the high range
Balance #
D100:0W–D0:100W
Volume balance between the direct sound (D)
and the flanger sound (W)
Level
0–127
Output level
26: HEXA-CHORUS
Uses a six-phase chorus (six layers of chorused sound) to give richness and spatial
spread to the sound.
Balance W
Balance W
L in
R in
L out
R out
Hexa Chorus
Balance D
Balance D
Parameter
Value
Explanation
Pre Delay
0.0–100[msec]
Adjusts the delay time from the direct sound
until the chorus sound is heard.
Rate #
0.05–10.00[Hz], note
Frequency of modulation
Depth
0–127
Depth of modulation
Pre Delay Deviation
0–20
Adjusts the differences in Pre Delay between
each chorus sound.
Depth Deviation
-20–+20
Adjusts the difference in modulation depth
between each chorus sound.
Pan Deviation
0–20
Adjusts the difference in stereo location
between each chorus sound.
0
All chorus sounds will be in the center.
20
Each chorus sound will be spaced at 60 degree
intervals relative to the center.
Balance #
D100:0W–D0:100W
Volume balance between the direct sound (D)
and the chorus sound (W)
Level
0–127
Output level
3
3
3
3
