Roland juno-ds61, Parameter Manual

Page: 51 / 88

51
MFX/Chorus/Reverb Parameters
46: MODULATION DELAY
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
When Feedback Mode is CROSS:
R in
R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
Parameter Value Explanation
Delay Left
0–1300[msec], note Adjusts the time until the delay sound is heard.
Delay Right
Feedback Mode NORMAL, CROSS
Selects the way in which delay sound is fed back
into the effect (See the figures.)
Feedback # -98–+98[%]
Adjusts the amount of the delay sound that’s fed
back into the effect.
Negative (-) settings invert the phase.
HF Damp
200–8000[Hz],
BYPASS
Adjusts the frequency above which sound fed
back to the effect is filtered out. If you don’t
want to filter out any high frequencies, set this
parameter to BYPASS.
Rate # 0.05–10.00[Hz], note Frequency of modulation
Depth
0–127 Depth of modulation
Phase 0–180[deg] Spatial spread of the sound
Low Gain -15–+15[dB] Gain of the low range
High Gain -15–+15[dB] Gain of the high range
Balance # D100:0W–D0:100W
Volume balance between the direct sound (D)
and the delay sound (W)
Level 0–127 Output level
47: 3TAP PAN DELAY
Produces three delay sounds; center, left and right.
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap
Parameter Value Explanation
Delay Left, Right,
Center
0–2600[msec], note
Adjusts the time from the original sound until the
left, right, and center delayed sounds are heard
Center Feedback #
-98–+98[%]
Adjusts the amount of the delay sound that’s fed
back into the effect.
Negative (-) settings invert the phase.
HF Damp
200–8000[Hz],
BYPASS
Adjusts the frequency above which sound fed
back to the effect is filtered out. If you do not
want to filter out any high frequencies, set this
parameter to BYPASS.
Left, Right, Center
Level
0–127 Volume of each delay
Low Gain -15–+15[dB] Gain of the low range
High Gain
-15–+15[dB] Gain of the high range
Balance # D100:0W–D0:100W
Volume balance between the direct sound (D)
and the delay sound (W)
Level
0–127 Output level
48: 4TAP PAN DELAY
This effect has four delays.
L in
R in
L out
R out
Quadruple
Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
2-Band
EQ
2-Band
EQ
Stereo location of each delay
1
2 3
4
L
R
Parameter Value Explanation
Delay 1–4 Time 0–2600[msec], note
Adjusts the time from the original sound until
delay sounds 1–4 are heard
Delay 1 Feedback # -98–+98[%]
Adjusts the amount of the delay sound that’s fed
back into the effect.
Negative (-) settings invert the phase.
HF Damp
200–8000[Hz],
BYPASS
Adjusts the frequency above which sound fed
back to the effect is filtered out. If you do not
want to filter out any high frequencies, set this
parameter to BYPASS.
Delay 1–4 Level 0–127 Volume of each delay
Low Gain
-15–+15[dB] Gain of the low range
High Gain -15–+15[dB] Gain of the high range
Balance # D100:0W–D0:100W
Volume balance between the direct sound (D)
and the delay sound (W)
Level 0–127 Output level
49: MULTI TAP DELAY
This effect provides four delays. Each of the Delay Time parameters can be set to a
note length based on the selected tempo. You can also set the panning and level of
each delay sound.
L in
R in
L out
R out
Multi Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 3
Delay 4
Delay 2
Feed
back
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
Delay 1–4 Time 0–2600[msec], note Adjusts the time until Delays 1–4 are heard.
Delay 1 Feedback # -98–+98[%]
Adjusts the amount of the delay sound that’s fed
back into the effect.
Negative (-) settings invert the phase.
HF Damp
200–8000[Hz],
BYPASS
Adjusts the frequency above which sound fed
back to the effect is filtered out. If you don’t want
to filter out any the high frequencies, set this
parameter to BYPASS.
Delay 1–4 Pan
L64–63R Stereo location of Delays 1–4
Delay 1–4 Level 0–127 Output level of Delays 1–4
Low Gain -15–+15[dB] Gain of the low range
High Gain -15–+15[dB] Gain of the high range
Balance # D100:0W–D0:100W
Volume balance between the direct sound (D)
and the effect sound (W)
Level 0–127 Output level
3
3
3
3