56
Detailed Editing for a Rhythm Set (RHYTHM Parameters)
OUTPUT
You can use the force with which keys are played to control the way each waveform is played.
fig.TMT-V.e
Parameter
Value
Explanation
SEND LEVEL OUT
(Output Level)
0–127
Level of the signal that is sent to the output destination specified by OUTPUT ASSIGN
SEND LEVEL (OUTPUT ASSIGN = MFX)
CHO (Chorus Send)
0–127
Level of the signal sent to chorus for each rhythm tone if the tone is sent through MFX
REV (Reverb Send)
0–127
Level of the signal sent to reverb for each rhythm tone if the tone is sent through MFX
SEND LEVEL (OUTPUT ASSIGN = non MFX)
CHO (Chorus Send)
0–127
Level of the signal sent to chorus for each rhythm tone if the tone is not sent through MFX
REV (Reverb Send)
0–127
Level of the signal sent to reverb for each rhythm tone if the tone is not sent through MFX
OUTPUT ASSIGN
MFX,
L+R,
L, R
Specifies how the direct sound of each rhythm tone will be output.
MFX:
Output in stereo through multi-effects. You can also apply chorus or reverb to the sound
that passes through multi-effects.
L+R:
Output in stereo to the OUTPUT jacks without passing through the multi-effect
L:
Output in mono to the OUTPUT L jack without passing through the multi-effect
R:
Output in mono to the OUTPUT R jack without passing through the multi-effect
* If the OUTPUT ASSIGN in “RHYTHM COMMON” is set to anything other than “TONE,” these
settings will be ignored.
* Sounds are output to chorus and reverb in mono at all times.
* The output destination of the signal after passing through the chorus is set with the CHORUS
OUTPUT SELECT parameters (p. 17).
VELOCITY (RHYTHM KEY VELOCITY RANGE)
Parameter
Value
Explanation
VELOCITY CONTROL
OFF, ON,
RANDOM
Determines whether a different waveform is played (ON) or not (OFF) depending on the force with
which the key is played (velocity).
RANDOM:
The rhythm tone’s constituent waveforms will sound randomly, regardless of any
Velocity messages.
FADE LOWER
0–127
Determines what will happen to the waveform’s level when the rhythm tone is played at a velocity
lower than Velocity Range Lower.
If you don’t want the waveform to sound at all, set this parameter to “0.”
LOWER
1–(UPPER)
Specifies the lowest velocity at which the waveform will sound.
UPPER
(LOWER)–127
Specifies the highest velocity at which the waveform will sound.
FADE UPPER
0–127
Determines what will happen to the waveform’s level when the rhythm tone is played at a velocity
greater than Velocity Range Upper.
If you don’t want the waveform to sound at all, set this parameter to “0.”
Velo Range Lower
Velo Range Upper
Velo Fade Lower
Velo Fade Upper
Level
The waveform sounded
when you play softly
The waveform sounded
when you play strongly
Velocity
