33
Detailed Editing for a Patch (PATCH Parameters)
TONE DELAY
This produces a time delay between the moment a key is pressed (or released), and the moment the tone actually begins to sound. You can also
make settings that shift the timing at which each tone is sounded. This differs from the Delay in the internal effects, in that by changing the sound
qualities of the delayed tones and changing the pitch for each tone, you can also perform arpeggio-like passages just by pressing one key.
You can also synchronize the tone delay time to the tempo of the JUNO-Di.
* If you are not going to use Tone Delay, set the TONE DELAY MODE parameter to “NORMAL” and DELAY TIME parameter to “0.”
* If STRUCTURE (p. 30) is set to TYPE 02–10, the settings for tone 1 (3) will follow the settings of tone 2 (4). (This is because the outputs of tones 1
and 2 are combined into tone 2, and the outputs of tones 3 and 4 are combined into tone 4.)
fig.ToneDly1.e
Parameter
Value
Explanation
TONE DELAY MODE
NORMAL,
HOLD,
KEY-OFF-NOR,
KEY-OFF-DCY
Type of tone delay
NORMAL:
The tone begins to play after the time specified in the TONE DELAY TIME parameter
has elapsed.
HOLD:
Although the tone begins to play after the time specified in the TONE DELAY TIME
parameter has elapsed, if the key is released before the time specified in the TONE DELAY
TIME parameter has elapsed, the tone is not played.
KEY-OFF-NOR:
Rather than being played while the key is pressed, the tone begins to play once
the period of time specified in the TONE DELAY TIME parameter has elapsed after release of
the key. This is effective in situations such as when simulating noises from guitars and other
instruments.
KEY-OFF-DCY:
Rather than being played while the key is pressed, the tone begins to play once
the period of time specified in the TONE DELAY TIME parameter has elapsed after release of
the key. Here, however, changes in the TVA Envelope begin while the key is pressed, which
in many cases means that only the sound from the release portion of the envelope is heard.
* If you have selected a waveform that is a decay-type sound (i.e., a sound that fades away
naturally even if the key is not released), selecting “KEY-OFF-NOR” or “KEY-OFF-DCY” may
result in no sound being heard.
TONE DELAY TIME
0–127, Note
Time from when the key is pressed (or if the Tone Delay Mode parameter is set to “KEY-OFF-NOR”
or “KEY-OFF-DCY,” the time from when the key is released) until when the tone will sound
Specify this as a note value if you want to synchronize the delay to the tempo of the
JUNO-Di.
Note off
Delay time
Note on
Tone Delay Mode: NORMAL
No Tone Delay
Note off
Delay time
Note on
Tone Delay Mode: HOLD
No sound
played
Note off
Delay time
Note on
Tone Delay Mode: KEY-OFF-NOR
Note off
Delay time
Note on
Tone Delay Mode: KEY-OFF-DCY
