Roland iModela iM-01 Master Manual Download Page 59 | Manualshive

Page: 59 / 73

background image

What to Do If

Chapter 4 Appendix

58

7. Choose the name of the drive or folder where the driver is located.*
8. Select "SETUP.EXE," click [Open], and then click [OK].
9. When the User Account Control dialog box appears, click [Allow].
The driver's setup program starts.
10. Click [Uninstall]. Select the machine that you want to uninstall, and then click [Start].
11. When a dialog box prompting you to restart the PC appears, click [Yes].
When the computer restarts, the uninstallation is finished.

* When you are using the CD-ROM, specify one of the following folders. (The CD drive is drive D in this ex-
ample.)
D:\Drivers\WINVISTAX64 (64-bit version)
D:\Drivers\WINVISTAX86 (32-bit version)
If you're not using the CD-ROM, go to the Roland DG Corp. website (http://www.rolanddg.com/), and download
the driver for the machine you want to delete. Then, specify the folder where you extracted the downloaded
file to.

Windows XP

1. Turn the machine off, and disconnect the USB cable that is connecting the PC and the machine.
2. Log on to Windows as an administrator or as a member of the Administrators group.
3. On the task bar, click [Start], [Control Panel], and then [Uninstall a program].
4. Select the machine's driver that you want to uninstall, and then click [Uninstall].
5. When a message prompting you to confirm that you want to uninstall the driver appears, click [Yes].
6. On the task bar, click [Start], [All Programs], [Accessories], [Run], and then [Browse].
7. Choose the name of the drive or folder where the driver is located.*
8. Select "SETUP.EXE," click [Open], and then click [OK].
The driver's setup program starts.
9. Click [Uninstall]. Select the machine that you want to uninstall, and then click [Start].
10. When a dialog box prompting you to restart the PC appears, click [Yes].
When the computer restarts, the uninstallation is finished.

* When you are using the CD-ROM, specify one of the following folders. (The CD drive is drive D in this ex-
ample.)
D:\Drivers\WINXPX64 (64-bit version)
D:\Drivers\WINXPX86 (32-bit version)
If you're not using the CD-ROM, go to the Roland DG Corp. website (http://www.rolanddg.com/), and download
the driver for the machine you want to delete. Then, specify the folder where you extracted the downloaded
file to.

«
...
57
58
59
60
61
...
»

Summary of Contents for iModela iM-01










































































Reviews:

No comments

Related manuals for iModela iM-01

MULTIMASTER FMM 250

Brand: Fein Pages: 130

Brand: Fein Pages: 30

Brand: Fein Pages: 61

Brand: Federal Signal Corporation Pages: 12

Brand: jbc Pages: 4

MagicLift 25057

Brand: Omega Lift Pages: 24

Brand: Stanford Research Systems Pages: 42

Brand: microjig Pages: 20

Bristle Blaster Pneumatic

Brand: Monti Pages: 268

Pocket-Hole Jig 7pce

Brand: Triton Pages: 20

Brand: Clarke Pages: 2

Brand: Fein Pages: 53

Brand: Sharkoon Pages: 10

Brand: NEISEN Pages: 4

Brand: Datcon Pages: 32

Brand: Shop fox Pages: 8

Brand: Dawson Pages: 63

Brand: Avdel Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands