Roland HP506, Owner'S Manual

Page: 61 / 68

& &
Error Messages
Indication Meaning
Error 1
You can only read the music file.
It can not be saved.
Error 2
An error occurred during writing. The external media may be corrupted.
Insert other external media and try again. Alternatively, you can initialize the external media.
Error 10
No external media is inserted.
Insert the external media and try again.
Error 11
There is not sufficient free memory in the save destination.
Either insert other external media or delete unneeded files and try again.
Error 14
An error occurred during reading. The external media may be corrupted.
Insert other external media and try again. Alternatively, you can initialize the external media.
Error 15 The file is unreadable. The data format is not compatible with the HP508.
Error 16
Data was not called up in time for playback of the song.
After waiting several seconds, you may be able to play back the song by pressing the [
] (Play/Stop) button again.
Error 18
This audio format is not supported.
Please use 44.1 kHz 16-bit linear WAV format audio files.
Error 30
Internal memory capacity of the HP508 is full.
Error 40
The HP508 cannot deal with the excessive MIDI data sent from the USB MIDI.
Reduce the amount of MIDI data sent to the HP508.
Error 43
A MIDI transmission error has occurred.
Check the connected MIDI device.
Error 51
There may be a problem with the system.
Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the Roland service center.
Error 65
The USB flash drive connector was subjected to excessive current.
Make sure that there is no problem with the external media, then turn the power off, then on again.
* External Media: USB flash drive
61
O
per
ation G
uide
Panel Descriptions
Bef
or
e
You P
la
y
Per
forming
Pr
ac
ticing
Piano Desig
ner
Con
venien
t F
unc
tions
A
ppendix
Func
tion M
ode