Roland GR-20 Owner'S Manual Download

Page: 9 / 52

Names of Things and What They Do

9. PATCH LINK SETUP/TRANSPOSE

indicator

This indicator lights when you edit the System
parameter PATCH LINK SETUP or the Patch
parameter TRANSPOSE (p. 19, p. 21).

10. MIDI CH/PLAY FEEL indicator

This indicator lights when you edit the System
parameter MIDI CH or the Patch parameter PLAY
FEEL (p. 18, p. 21).

11. [SYSTEM EDIT] button

Press this when you want to edit System parameters (p.
14, p. 18, p. 19, p. 26, p. 27).

12. [PATCH EDIT] button

Press this when you want to edit Patch parameters (p.
21).

13. [ATTACK] knob

Adjusts the speed of the attack (p. 20).

14. [RELEASE] knob

Adjusts the length of the release (p. 20).

15. [CHORUS] knob

Adjusts the chorus depth (p. 20).

16. [DELAY/REVERB] knob

Adjusts the delay or reverb depth (p. 20).

17. [LEVEL] knob

Adjusts the volume of the synth sound for each patch
(p. 20).

18. [EXIT] button

Press this to cancel an operation, or to return to a
previous state.

19. [WRITE] button

Press this button to write (store) or copy a patch (p. 24,
p. 25).

20. [TUNER] button

Press this button when you want to use the Tuner
function (p. 13).

21. [EXP PEDAL] button

Press this button to select the function of the expression
pedal (p. 23).

22. [GLIDE TYPE] button

Press this button to select the function of the Glide
pedal (p. 22).

23. [HOLD TYPE] button

Press this button to select the function of the Hold
pedal (p. 23).

24. GLIDE pedal

Press this pedal to apply the Glide effect to the sound
(p. 15).

25. GLIDE indicator

This indicator will light or blink according to how you
operate the GLIDE pedal.

26. HOLD pedal

Press this pedal to apply the Hold effect to the sound
(p. 16).

27. HOLD indicator

This indicator will light or blink according to how you
operate the HOLD pedal.

28. Expression pedal

Use this pedal to adjust the volume or to apply
continuous change to the sound (p. 16).

When you operate the expression pedal, please be
careful not to get your fingers pinched between the
movable part and the panel.

In households with small children, an adult should
provide supervision until the child is capable of
following all the rules essential for the safe operation of
the unit.

GR-20_e.book 9 ページ２００７年７月２日　月曜日　午後１２時５３分

Summary of Contents for GR-20





















































Search results

Summary of Contents for GR-20

Reviews:

Related manuals for GR-20

Brands by name

Popular brands

Roland GR-20, Owner'S Manual

Search results

Summary of Contents for GR-20

Reviews:

Related manuals for GR-20

Brands by name

Popular brands