Roland FP-4, Owner'S Manual

Page: 57 / 140

57
Saving Your Favorite Performance Settings
You can use the [Registration] button to store the currently selected buttons and Session
Partner settings. You can also use the [Registration] button and [1]–[6] buttons to recall
the settings you’ve stored. If you have certain combinations of Session Partner settings
and tones that you use frequently, you will find it convenient to save them as registrations.
The FP-4 lets you store twenty-four different sets of performance settings.
The recommended settings were stored in the FP-4 when it shipped from the factory.
Registration from 6-1 to 6-4 include the “Basic Registration.” Use this when creating
registration from scratch.
For details on the settings that are saved as a registration, refer to “Settings Stored in a
Registration” (p. 128).
fig.Panel-RegistSave.eps
Specifying the Storage Destination for the Registration
1. Make the desired Session Partner settings and tone settings.
2.
While holding down the [Registration] button, press the button to which
you want to store the registration (button [1]–[6]).
Keep holding down the [Registration] button.
fig.d-Regist.eps
3. Continuing to hold down the [Registration] button, use the [-] [+] buttons to
select a variation.
fig.d-RegistVar.eps
Storing Your Performance Settings (Registration)
FP-4-e.book 57 ページ ２００７年５月２４日 木曜日 午後７時１０分