Roland FP-4, Owner'S Manual

Page: 23 / 140

23
Listening to Songs
Playing the Song
3. Press the [Play] button.
The selected song will play.
The selected song is played to the end, and then playback stops.
If a song is playing while the song select screen is displayed, you can rewind the song
by holding down the [-] button, or fast-forward the song by holding down the [+] button.
The display will indicate the measure number during fast-forward or rewind.
To stop playback, press the [Play] button once more.
The next time you press the [Play] button, playback will resume from the point at which you
stopped.
If playback has stopped at the end of the song, playback will start from the beginning of the song.
If the song select screen is displayed, pressing the [-] button will return you to the beginning of the
song. Pressing the [-] button once again will return you to the preceding song.
Here’s how to adjust the volume when song is playing back.
1. While holding down the [Play] button, press the [-] or [+] button.
fig.d-SPvolume.eps
The song volume can be set to any value from 0 to 127.
While you hold down the [Play] button, the display will show the volume of the song.
You can not change the volume of the demo song.
You can also adjust the volume of the song by turning the [Balance] knob while you
hold down the [Play] button.
Changing the Volume of the Song
About the Song Select Display
The song select display will change as follows.
fig.SongDisplay-e.eps
By holding down the [Display] button and pressing the [-] [+] buttons, you can quickly
select the first song in the song group (i.e., “first song in internal memory,” or “first built-
in preset song”).
“U.**” will not appear if there is no song in internal memory.
Song of the
Internal memory The song you’re
newly recording
Internal Song
NOTE
NOTE
FP-4-e.book 23 ページ ２００７年５月２４日 木曜日 午後７時１０分