Roland Fantom XR, Owner'S Manual

Page: 98 / 284

98
Playing Arpeggios
1.
In the Arpeggio/Chord Switch screen (in Performance
mode, the Arp/Chd/Rhy Switch screen), use or to
select “Arp.”
2.
Press [SHIFT] so it lights, and then press .
Or, press [ENTER].
The Arpeggio screen will appear.
fig.11-004.e
While this screen is displayed, you can press [SHIFT] so it
lights, then press to view a list of the arpeggio styles.
Another way to access the Arpeggio screen is to press [MENU]
to access the Arpeggio/Chord Menu screen (in Performance
mode, the Arp/Chd/Rhy Menu screen), then choose
“Arpeggio” and press [ENTER].
3.
Use or to move the cursor to each parameter, and
turn the VALUE dial or use [INC][DEC] to make the setting.
4.
When you have made the setting, press [EXIT].
In the Arpeggio screen, you can press [SHIFT] so it lights, then
press
to move the cursor to the arpeggio style.
By pressing OUTPUT knob, you can audition the sound of the
arpeggio style.
When you save a performance, the arpeggio on/off status and
the settings of the Arpeggio screen will also be saved. If you
want to create a specific combination of sounds and arpeggio
settings, make your settings in Performance mode and save
them.
This selects the arpeggio’s basic performance Style. The arpeggio
styles are kept in preset memory and user memory.
Value: U001–128 (User), P001–128 (Preset)
You can press [GROUP] to switch between User and Preset
memory.
For more on the prepared Arpeggio Styles already programmed
in the Fantom-XR, refer to
“Arpeggio Style List” (p. 239).
This sets the arpeggio tempo.
* Editing the Tempo setting will change the System setting “Tempo” (p.
156). The tempo setting cannot be saved as part of the Arpeggio Style.
Value:
5–300
Arpeggio Settings
Arpeggio Style
Selecting Styles for Arpeggio
Performances (Arpeggio Style)
Determining the Tempo for
Arpeggio Performances
About Arpeggio Styles
An Arpeggio Style is a series of data for basic arpeggio patterns
and chord styles recorded in the form of a grid consisting of a
maximum of 32 steps x 16 pitches.
fig.11-005
Each grid contains one of the following kinds of data.
• ON: Note On (with Velocity data)
• TIE: Tie (hold of the previous note)
• REST: Rest (no sound played)
The keys that are pressed along with the sequence in which they
are pressed is referenced to the “lowest-pitched key during
input.” Thus, you can use a single Arpeggio Style in different
Patches and Performances at the same time.
A Arpeggio Style is not part of any patch or Performance, but
rather independent data; you can store up to 64 Arpeggio
Styles.
STEP
HIGH
1 2 3 4 5 .... 32 6 7 8 9 10 11
Note 01
Note 03
Note 02
Note 04
Note 16
Note 05
Note 06
Fantom-XR_r_e.book 98 ページ ２００６年４月４日 火曜日 午前１０時１４分