39
Playing in Patch Mode
Functions in the Patch Play screen
fig.05-005.e
The Fantom-X has eight patch groups, including the User group and
Preset groups A–H and GM, with each group storing 128 patches
(256 in GM, USER). What’s more, you can further expand your
options by installing up to four optional Wave Expansion Boards
(SRX series; sold separately), enabling you to select from a huge
assortment of available patches.
USER
This is the group inside the Fantom-X which can be rewritten.
patches you yourself create can be stored in this group. The Fantom-
X includes 256 preset patches.
PR-A–H (Preset A–H)
This is the group inside the Fantom-X which cannot be rewritten.
However you may modify the settings of the currently selected
patch, and then store the modified patch in User memory. Groups
A–H already contain 128 prepared patches each, for a total of 1024
patches.
CARD (Memory Card)
This group lets you use patches stored on a memory card inserted in
the rear panel card slot. Since the data in this group can be rewritten,
you can use this group to store patches that you create.
GM (GM2)
This is an internal group of patches compatible with General MIDI 2,
a system of MIDI function specifications designed to transcend
differences between makers and types of devices; these patches
cannot be overwritten. Furthermore, settings of currently selected
patches from this group cannot be changed. The Fantom-X includes
256 preset patches.
XP-A–D (Wave Expansion Boards installed in
EXP-A–D Slots)
These are groups used when using patches from Wave Expansion
Boards installed in the EXP A–D slots, and cannot be rewritten.
However you may modify the settings of the currently selected
patch, and then store the modified patch in User memory and
Memory card. The number of onboard patches depends on the
specific Wave Expansion Boards installed.
XP-A–D patches can be selected only if a Wave Expansion
Board SRX series (SRX series; sold separately) is installed in the
corresponding slot.
1
5
6
8
10
12
13
15
14
8
2
11
11
18
Displays the Control Setting screen.
8
Adjusts the volume of the keyboard part and pad part.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
4
Displays the Tone SW/Select screen.
20
Switches the Patch Play screen.
21
Switches
the keyboard part and pad part.
22
3
7
16
17
19
20
21
22
9
9
7
Indicates the current sound generating mode.
Indicates the volume of the Keyboard part and Pad part.
Indicates multi-effects (MFX1, 2), chorus (CHO), reverb (REV),
and masterring (MASTER) on and off.
Indicates the name of the currently selected song,
the measure location
Indicates the time signature, and the tempo.
Indicates the Loop Play on/off (LOOP).
Sets the Transpose (Trans). And indicates the Octave Shift (Oct).
Patch/rhythm set select switch
Determines whether you will be selecting patches or rhythm sets.
Indicates/selects the patch category.
Selects whether the patch category will be locked.
Indicates/selects the group, number,
and name of the selected patch.
Indicates the tone On/Off status.
Indicates whether the controller settings will apply
to the keyboard or the pads.
Indicates the state of the pad settings.
Indicates the rhythm tone.
Indicates the functions that are assigned to each
realtime controller knob (
●
) and assignable switch (
■
).
This indicates the function that is assigned to the D Beam controller,
and the response status of the D Beam controller.
Displays the Patch List screen.
Displays the Favorite screen.
Selecting a Patch
Fantom-X678_r_e.book 39 ページ ２００５年５月１２日 木曜日 午後４時４０分
