manualshive.com logo in svg

Roland FANTOM Series, Reference Manual

Share
Download
Roland FANTOM Series Reference Manual Download Page 18

18

Getting Ready

Placing This Unit on a Stand

Be careful not to pinch your fingers when setting up the stand . Place the instrument on the stand as follows .

 

*

When using the KS-10Z, ensure that the height of the unit is one meter or lower.

If You’re Using

 the FANTOM-6/FANTOM-7

If you want to place the FANTOM-6/FANTOM-7 on a stand, please use the KS-12 or KS-10Z stands manufactured by Roland .

 

*

The illustration shows the FANTOM-6.

KS-12

Adjust the horizontal width of the 

stand so that the rubber feet on 

the keyboard side of the FANTOM 

fit into the holes that are provided 

to accommodate them .

Top view

KS-10Z

Align the front of 

the FANTOM with 

the front of the 

stand

Adjust the horizontal width of the 

stand as shown in the illustration .

Top view

Adjust so that 

the height does 

not exceed one 

meter . 

FANTOM-6

0

680 mm

FANTOM-7

0

780 mm

Summary of Contents for FANTOM Series





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands