61
Playing in Live Mode
Over
view
Sound 1
Sound 2
Sound 3
Pad
Sampler
Menu/System
Appendix
Sequencer
When you modify the settings of a Live Set, the Live Play screen
will indicate “
.” The settings you modify are temporary, and
will be lost when you turn off the power, switch the sound
generator mode, or select a different sound. If you want to keep
the modified sound, you must save it in the User bank (
a Live/Studio Set You’ve Created (Write)”
The currently selected part is called the “
current part
.”
1.
Press [LIVE] to access the Live Play (Layer/Split) Screen.
2.
Use
or
to select the part.
The part number is shown in red for the selected part.
fig.08-007_50
As you continue pressing
, the screen will scroll downward,
allowing you to select expansion board parts (if an expansion
board is installed) or external MIDI output parts.
Here’s how to select the parts whose patch, rhythm set or sample set
will sound. For each part, use the switch to specify whether that part
will be played from the keyboard; this is called the “keyboard
switch.”
1.
In the Live Play (Layer/Split) screen, use [CURSOR] to move
the cursor to the “KBD” area, and press [INC] to turn on the
keyboard switch for the part(s) you want to play.
When you play the keyboard, you’ll hear the part(s) whose
keyboard switch you turned on. If all of the keyboard switches
are off, you’ll hear the current part.
fig.08-008_50
You can turn on the keyboard switch for more than one part.
By pressing [F6
] you can switch to a screen that shows only
the parts whose keyboard switch is on.
The current part will not sound if even one keyboard switch is
on. If you want to hear the current part, turn off the keyboard
switch for all parts.
Use the pad switch to select the part whose rhythm set or sample set
will be played by the pads.
1.
As described in the procedure for “Switching the Pad Mode
(PAD MODE)” (p. 188), set the pad mode to either “1
SAMPLE PAD” or “2 RHYTHM.”
2.
In the Live Play (Layer/Split) screen, use [CURSOR] to move
the cursor to the “SAM” or “RHY” field, and press [INC] to
turn on the pad switch for the part that you want to play
from the pads.
When you press the pads, you’ll hear the part whose pad switch
is on.
Make sure that the Patch Type is set to “SAMPLE“ or
“RHYTHM.” If this is set to “PATCH,” use [CURSOR] to move
the cursor to the patch type, and turn the VALUE dial or press
[INC] [DEC] to select “SAMPLE“ or “RHYTHM.”
In the same way, you can use the “ARP” switch to specify the
If you don’t like the patch that is assigned to a part, it’s easy to
switch the patch.
1.
Select the part whose sound you want to switch.
2.
Press [F1 (Patch List)].
The Patch List screen will appear.
fig.05-008_50
For details on using the Patch List screen, refer to
Using the Live Play (Layer/
Split) Screen
Selecting a Part
Selecting the Part that You want to
Sound (Keyboard Switch)
Selecting the Part Played by the Pads
Selecting the Sound for a Part
Patch Type
Fantom-G_r_e.book 61 ページ ２００９年７月２日 木曜日 午後２時５５分
