manualshive.com logo in svg

Roland Fantom G6, User Manual

The Roland Fantom G6 is a cutting-edge synthesizer workstation equipped with a plethora of features, allowing musicians to unleash their creativity. To make the most of this incredible device, download the free Fantom G6 Features Manual from our website or explore the extensive manual collection available for download.

Share
Download
background image

 

299

System Settings (Settings Common to All Modes)

 

Over

view

Sound 1

Sound 2

Sound 3

Pad

Sampler

Menu/System

Appendix

Sequencer

 

Device ID (Device ID Number)

 

When you want to transmit or receive System Exclusive messages, 
set this parameter to match the Device ID number of the other MIDI 
device.

 

Value:

 

 17–32

 

Studio Set Control Channel

 

Studio Set Control Channel selects the MIDI receive channel used 
during switching of studio sets when MIDI messages (Program 
Change/Bank Select) are sent from an external MIDI device. Set this 
to “OFF” if studio sets are not to be switched from an external MIDI 
device.

 

Value:

 

 1–16, OFF

 

If only a program change is received, and if the Studio Set 
Control Channel parameter setting coincides with the MIDI 
receive channel of a part, priority will be given to switching the 
studio set.

 

Live Set Control Channel

 

Live Set Control Channel selects the MIDI receive channel used 
during switching of live sets when MIDI messages (Program Change/
Bank Select) are sent from an external MIDI device. Set this to “OFF” 
if live sets are not to be switched from an external MIDI device.

 

Value:

 

 1–16, OFF

 

If only a program change is received, and if the Live Set Control 
Channel parameter setting coincides with the MIDI receive 
channel of a part, priority will be given to switching the live set.

 

Transmit Program Change 
(Transmit Program Change Switch)

 

Specifies whether Program Change messages will be transmitted 
(ON) or not (OFF).

 

Value:

 

 OFF, ON

 

Transmit Bank Select 
(Transmit Bank Select Switch)

 

Specifies whether Bank Select messages will be transmitted (ON) or 
not (OFF).

 

Value:

 

 OFF, ON

 

Transmit Active Sensing 
(Transmit Active Sensing Switch)

 

Specifies whether Active Sensing messages will be transmitted (ON) 
or not (OFF).

 

Value:

 

 OFF, ON

 

Transmit Edit Data (Transmit Edit Data Switch)

 

Specify whether changes you make in the settings of a patch, live set 
or studio set will be transmitted as system exclusive messages (ON), 
or will not be transmitted (OFF).

 

Value:

 

 OFF, ON

 

Soft Through (Soft Through Switch)

 

Thru function re-transmits all messages received at the MIDI IN 
connector to the MIDI OUT connector without modifying them in 
any way. 

 

Value:

 

 OFF, ON

 

Remote Keyboard Sw 
(Remote Keyboard Switch)

 

Set this parameter “ON” when you want to use an external MIDI 
keyboard instead of the Fantom-G’s keyboard. In this case, the MIDI 
transmit channel of the external MIDI keyboard can be set to any 
channel. Normally you will leave this parameter “OFF.”

 

Value:

 

 OFF, ON

 

Turn this “ON” when you want to control the Fantom-G from 
an external MIDI device when performing with the Arpeggio or 
Chord Memory function.

 

Receive Program Change 
(Receive Program Change Switch)

 

Specifies whether Program Change messages will be received (ON) 
or not (OFF).

 

Value:

 

 OFF, ON

 

Receive Bank Select 
(Receive Bank Select Switch)

 

Specifies whether Bank Select messages will be received (ON) or not 
(OFF).

 

Value:

 

 OFF, ON

 

Receive Exclusive 
(Receive System Exclusive Switch)

 

Specifies whether System Exclusive messages will be received (ON) 
or not (OFF).

 

Value:

 

 OFF, ON

 

Receive GM1 System On 
(Receive GM System On Switch)

 

Specifies whether General MIDI System On messages will be 
received (ON) or not (OFF).

 

Value:

 

 OFF, ON

 

Receive GM2 System On 
(Receive GM2 System On Switch)

 

Specifies whether General MIDI 2 System On messages will be 
received (ON) or not (OFF).

 

Value:

 

 OFF, ON

 

Receive GS Reset (Receive GS Reset Switch)

 

Specifies whether GS Reset messages will be received (ON) or not 
(OFF).

 

Value:

 

 OFF, ON

 

MIDI

Fantom-G_r_e.book 299 ページ ２００９年７月２日　木曜日　午後２時５５分

Summary of Contents for Fantom G6





















































































































































































































































































































































Reviews:

No comments

Related manuals for Fantom G6

Unitech K270 Product Manual preview
K270
Brand: Unitech Pages: 2
Yamaha Arius YDP-140 Quick Operation Manual preview
Arius YDP-140
Brand: Yamaha Pages: 2
Yamaha PortaSound PSS-580 Manual De Instrucciones preview
PortaSound PSS-580
Brand: Yamaha Pages: 29
M-Audio Axiom A.I.R. Mini 32 Service Manual preview
Axiom A.I.R. Mini 32
Brand: M-Audio Pages: 26
Xiamen HK8065 Product Manual preview
HK8065
Brand: Xiamen Pages: 2
Roccat VULCAN TKL Quick Installation Manual preview
VULCAN TKL
Brand: Roccat Pages: 12
Razer Lycosa Gaming Keyboard User Manual preview
Lycosa Gaming Keyboard
Brand: Razer Pages: 24
J.Burrows KB110 Instruction Manual preview
KB110
Brand: J.Burrows Pages: 6
Cherry G83-14300 Specifications preview
G83-14300
Brand: Cherry Pages: 2
ParaBody 810102 Assembly Instruction Sheet preview
810102
Brand: ParaBody Pages: 4
red kiwi S-Line Lady User Manual preview
S-Line Lady
Brand: red kiwi Pages: 16
American Dynamics ControlCenter 200/300 Series Datasheet preview
ControlCenter 200/300 Series
Brand: American Dynamics Pages: 2
Trust KB-2800 Quick Manual preview
KB-2800
Brand: Trust Pages: 2
Trust 15906 User Manual preview
15906
Brand: Trust Pages: 47
Kensington KeyFolio Exact Plus Quick Start Manual preview
KeyFolio Exact Plus
Brand: Kensington Pages: 96
Totally Wicked Skope P User Manual preview
Skope P
Brand: Totally Wicked Pages: 2
Totally Wicked V-Pipe User Manual preview
V-Pipe
Brand: Totally Wicked Pages: 32
Dakota Digital LED Tail Lights LAT-NR340 Installation Instructions preview
LED Tail Lights LAT-NR340
Brand: Dakota Digital Pages: 3

Brands by name

Popular brands

Load more brands