manualshive.com logo in svg

Roland Fantom G6, User Manual

The Roland Fantom G6 is a cutting-edge synthesizer workstation equipped with a plethora of features, allowing musicians to unleash their creativity. To make the most of this incredible device, download the free Fantom G6 Features Manual from our website or explore the extensive manual collection available for download.

Share
Download
background image

 

237

Editing Songs

 

Over

view

Sound 1

Sound 2

Sound 3

Pad

Sampler

Menu/System

Appendix

Sequencer

 

In the Song Play/Song Edit screen you can perform Track 
operations such as Insert (Inserting a Blank Measure), Delete 
(Deleting Unwanted Measures), or Copy (Copying Measures).

 

The Track Edit functions do not edit the phrases or samples 
themselves. For example, if you have assigned a ten-measure 
long phrase to measure 1, and then use the track edit function 
“Track Edit Delete” (Deleting Unwanted Measures) to delete 
measures 2–3, no content within the phrase will be deleted. If 
you want to delete material from within the phrase, use a 
Phrase Modify function (p. 239) to edit the phrase.

 

1.

 

In the Song Play/Song Edit screen, press [F7 (Song Util)].

 

2.

 

From the menu that appears, select one of the following 
items and press [F8 (Select)].

 

Details about the windows for each of the Track Edit functions 
are explained in the section on each function.

 

You can also perform track edit functions in the Song Play/
Song Edit screen by holding down [SHIFT] and pressing [F1]–
[F3].

 

3.

 

Set the parameters for each function. Use the cursor 
buttons to move the cursor to the desired parameter, and 
turn the VALUE dial or use [INC]/[DEC] to set the value. 

 

4.

 

Press [F8 (Execute)].

 

A confirmation screen will appear.

 

5.

 

Press [F7 (OK)] to execute.

 

You can undo the result of the editing operation by pressing 
[MENU]

 

➔

 

[F5 (Undo)].

This function inserts blank measures into a specified phrase 
position. 

 

Source Track

 

Select the track that you want to edit. If you want to edit all 
tracks, select “ALL.”

 

Measure, For (Edit Range)

 

Specifies the measure location at which the blank measures are 
to be inserted, and the number of blank measures to be inserted. 

 

Beat (Time Signature)

 

Specify the time signature.

This function deletes a specified area of sequencer data, and 
moves the subsequent data to fill the gap. As a result, the 
measure length will be shortened by the number of deleted 
measures.

 

Source Track

 

Select the track that you want to edit. If you want to edit all 
tracks, select “ALL.”

 

Measure, For (Edit Range)

 

Specifies the range of measures that are to be deleted. If you set 
“For” to “ALL,” all measures will be specified.

You can copy measures of the specified region in a track.

 

If the region to copy does not include the beginning of a phrase 
or sample, that phrase or sample will not be copied.

 

Source Track

 

Select the track that you want to edit. If you want to edit all 
tracks, select “ALL.”

 

Src Measure, For (Edit Range)

 

Specifies the range of copy-source measures. If you set “For” to 
“ALL,” all measures will be specified.

 

Dst Measure (Destination Measure)

 

Specifies the copy-destination measure.

If you want the copy destination to be right after the last 
measure of a phrase, set this parameter to “END.”

 

Copy Times

 

Specifies the number of times that the data will be copied to the 
copy destination.

 

Track Edit Function

 

Menu

Explanation

 

Track Edit Insert

Inserting a Blank Measure

Track Edit Delete

Deleting Unwanted Measures

Track Edit Copy

Copying Measures

 

Inserting Blank Measures into a 

Track

 (Track Edit Insert)

Deleting Unwanted Measures from 

a Track (Track Edit Delete)

Copying Measures of a Track 

(Track Edit Copy)

Fantom-G_r_e.book 237 ページ ２００９年７月２日　木曜日　午後２時５５分

Summary of Contents for Fantom G6





















































































































































































































































































































































Reviews:

No comments

Related manuals for Fantom G6

Unitech K270 Product Manual preview
K270
Brand: Unitech Pages: 2
Innokin JEM Quick Start Manual preview
JEM
Brand: Innokin Pages: 3
Siel Sielorchestra Owner'S Manual preview
Sielorchestra
Brand: Siel Pages: 9
Subaru SPN0001105 User Manual preview
SPN0001105
Brand: Subaru Pages: 44
Roccat Sova MK Quick Installation Manual preview
Sova MK
Brand: Roccat Pages: 2
Emprex 8193URF Install Manual preview
8193URF
Brand: Emprex Pages: 1
Bontempi MUSIC ACADEMY 16 6125 Owner'S Manual preview
MUSIC ACADEMY 16 6125
Brand: Bontempi Pages: 44
Azio KB333BM Specifications preview
KB333BM
Brand: Azio Pages: 2
Waeco MagicWatch MWE850 Installation And Operating Manual preview
MagicWatch MWE850
Brand: Waeco Pages: 200
Macally ACEBTKEYA User Manual preview
ACEBTKEYA
Brand: Macally Pages: 19
Macally ACEKEY User Manual preview
ACEKEY
Brand: Macally Pages: 8
Handy Tech Easy Braille Quick Reference Manual preview
Easy Braille
Brand: Handy Tech Pages: 4
Naxa NSW-11 Instruction Manual preview
NSW-11
Brand: Naxa Pages: 22
Sirius XM RAdio Lynx LV1 Quick Start Manual preview
Lynx LV1
Brand: Sirius XM RAdio Pages: 29
Sirius XM RAdio Onyx EZ User Manual preview
Onyx EZ
Brand: Sirius XM RAdio Pages: 88
red kiwi S-Line Lady User Manual preview
S-Line Lady
Brand: red kiwi Pages: 16
Franklin Central European Translator TCE-100 (German) Benutzerhandbuch preview
Central European Translator TCE-100
Brand: Franklin Pages: 17
Franklin BOOKMAN MWS-840 User Manual preview
BOOKMAN MWS-840
Brand: Franklin Pages: 20

Brands by name

Popular brands

Load more brands