manualshive.com logo in svg

Roland Fantom G6, User Manual

The Roland Fantom G6 is a cutting-edge synthesizer workstation equipped with a plethora of features, allowing musicians to unleash their creativity. To make the most of this incredible device, download the free Fantom G6 Features Manual from our website or explore the extensive manual collection available for download.

Share
Download
background image

 

139

Creating a Live/Studio Set

 

Over

view

Sound 1

Sound 2

Sound 3

Pad

Sampler

Menu/System

Appendix

Sequencer

 

Part Vibrato Rate

 

For each part, adjust the vibrato speed (the rate at which the pitch is 
modulated). The pitch will be modulated more rapidly for higher 
settings, and more slowly with lower settings.

 

Value:

 

 -64– +63

 

*

EXP 1, EXP 2, and External parts do not have this item.

 

Part Vibrato Depth

 

For each part, this adjusts the depth of the vibrato effect (the depth at 
which the pitch is modulated). The pitch will be modulated more 
greatly for higher settings, and less with lower settings.

 

Value:

 

 -64– +63

 

*

EXP 1, EXP 2, and External parts do not have this item.

 

Part Vibrato Delay

 

For each part, this adjusts the time delay until the vibrato (pitch 
modulation) effect begins. Higher settings will produce a longer 
delay time before vibrato begins, while lower settings produce a 
shorter time.

 

Value:

 

 -64– +63

 

*

EXP 1, EXP 2, and External parts do not have this item.

 

Part Cutoff Offset

 

Adjusts the cutoff frequency for the patch, rhythm set or sample set 
assigned to a part.

 

Value:

 

 -64– +63

 

Patches also have a Cutoff Offset setting (p. 90). The final Cutoff 
frequency value is the sum of the tone Cutoff Frequency value 
and the patch and part Cutoff Offset values. If the tone’s cutoff 
frequency is already set to “127” (maximum), there will be no 
change produced by setting the Cutoff Offset to a positive 
value.

 

*

EXP 1, EXP 2, and External parts do not have this item.

 

Part Resonance Offset

 

Adjusts the Resonance for the patch, rhythm set or sample set 
assigned to a part.

 

Value:

 

 -64– +63

 

Patches also have a Resonance Offset setting (p. 91). The final 
Resonance value is the sum of the tone Resonance value and the 
patch and part Resonance Offset values. If the tone’s resonance 
is already set to “127” (maximum), there will be no change 
produced by setting the resonance offset to a positive value.

 

*

EXP 1, EXP 2, and External parts do not have this item.

 

Part Attack Time Offset

 

Adjusts the TVA/TVF Envelope Attack Time for the patch, rhythm 
set or sample set assigned to a part.

 

Value:

 

 -64– +63

 

Patches also contain the Attack Time Offset setting (p. 91). The 
final TVA Envelope attack time value is therefore the sum of the 
tone’s TVA Envelope Time 1 setting, the patch’s Attack Time 
Offset, and the part’s Attack Time Offset. If the tone’s Time 1 
parameter is already set to “127” (maximum), there will be no 
change produced by setting the Attack Time Offset to a positive 
value.The same applies to the TVF envelope.

 

*

EXP 1, EXP 2, and External parts do not have this item.

 

Part Decay Time Offset

 

Adjusts the TVA/TVF Envelope Decay Time for the patch or rhythm 
set assigned to a part.

 

Value:

 

 -64– +63

 

This setting is ignored for parts to which a sample set is 
assigned.

 

*

EXP 1, EXP 2, and External parts do not have this item.

 

Vibrato

Offset

Fantom-G_r_e.book 139 ページ ２００９年７月２日　木曜日　午後２時５５分

Summary of Contents for Fantom G6





















































































































































































































































































































































Reviews:

No comments

Related manuals for Fantom G6

Axxess AX-DSPX-HYKIA2 Installation Instructions preview
AX-DSPX-HYKIA2
Brand: Axxess Pages: 4
Fujitsu FPCKB51A1P User Manual preview
FPCKB51A1P
Brand: Fujitsu Pages: 20
Fujitsu B6FY-0701-01EN-00 User Manual preview
B6FY-0701-01EN-00
Brand: Fujitsu Pages: 8
Fujitsu FKB1406 Series Specifications preview
FKB1406 Series
Brand: Fujitsu Pages: 4
Fujitsu FKB8735 Series Specifications preview
FKB8735 Series
Brand: Fujitsu Pages: 6
Fujitsu FKB7401 Series Specifications preview
FKB7401 Series
Brand: Fujitsu Pages: 5
Fujitsu FKB7614 SERIES Specifications preview
FKB7614 SERIES
Brand: Fujitsu Pages: 4
Cherry G83-14501LPAUS Specifications preview
G83-14501LPAUS
Brand: Cherry Pages: 2
Canon Electronic Dictionary Quick Reference preview
Electronic Dictionary
Brand: Canon Pages: 16
Logitech TYPE - S Setup Manual preview
TYPE - S
Brand: Logitech Pages: 24
Logitech K800 Getting Started Manual preview
K800
Brand: Logitech Pages: 34
Logitech G913 Manual preview
G913
Brand: Logitech Pages: 51
Logitech 968019-0403 - Classic Keyboard 200 Wired Limited Warranty preview
968019-0403 - Classic Keyboard 200 Wired
Brand: Logitech Pages: 2
Logitech G510 Getting Started preview
G510
Brand: Logitech Pages: 148
Cross Technologies 3116-66T42 Instruction Manual preview
3116-66T42
Brand: Cross Technologies Pages: 16
Behavioral Technology Group 9051H Quick Installation Manual preview
9051H
Brand: Behavioral Technology Group Pages: 2
E-Mu Vintage Keys Operation Manual preview
Vintage Keys
Brand: E-Mu Pages: 262
Roland E-A7 Reference Manual preview
E-A7
Brand: Roland Pages: 70

Brands by name

Popular brands

Load more brands