Roland FANTOM-06 Reference Manual Download

Page: 87 / 190

Editing Parameters for Individual Keys

(MULTISAMPLE EDIT PRO)

You can edit the parameters for individual keys in detail from the

MULTI SAMPLE EDIT PRO screen.

Menu

Explanation

[E1]

Changes the scale of the onscreen

keyboard.
Press down on this knob while turning it

to scroll the keyboard display area when

zooming in.

[E2] To Pro/To Zoom

Switches between the Pro Edit and Zoom

Edit screens.

[E3] Wave Number

Changes all sample numbers in the

selected area. Turn the knob while pushing

it down to make only the sample number

for the key shown at the cursor point

change.

[E4] Level

Changes the Level for all samples in the

selected area. Turn the knob while pushing

it down to change only the sample level

for the key shown at the cursor point.

[E5] Fine Tune

Changes the Fine Tune for all samples in

the selected area. Turn the knob while

pushing it down to change only the “Fine

Tune” of the sample belonging to the key

shown at the cursor point.

[E6] Original Key

Changes the Original Key for all samples

in the selected area. Turn the knob while

pushing it down to change only the

Original Key for the key shown at the

cursor point.
Pressing this knob while playing the

keyboard changes the Original Key for all

samples in the selected area to the note

number you play on the keyboard.

<WRITE>

Saves the multisample.

<MANAGER>

Accesses the MULTISAMPLE MANAGER

screen.

<UTILITY>

This is the UTILITY menu for multisamples.

Managing Samples for Key Areas

(MULTISAMPLE MANAGER)

You can call up this screen from the MULTISAMPLE EDIT/PRO EDIT

screens. Here you can set the individual parameters of each sample

that was assigned when the multisample was created.
You can also add, delete or change samples that are assigned to the

keyboard.

KBD Sample List

Menu

Explanation

[E1]

Changes the scale of the onscreen

keyboard.
Press down on this knob while turning it

to scroll the keyboard display area when

zooming in.

[E2] PREVIEW

You can preview the samples selected in

the KBD Sample List while pressing this

knob.

[E3]

Scrolls the list up/down.

[E4] WAVE EDIT

Accesses the WAVE EDIT screen.

[E5] NO ASSIGN

Cancels the assignment of the selected

sample to the keyboard.

[E6] ASSIGN

Assigns the selected sample to the

keyboard.

<WRITE>

Saves the sample parameters.

<RELOAD>

Reloads the sample parameters.

<MODIFY>

Adds various effects to the sample.

<UTILITY>

Displays the “Kbd Sample Utility” (p. 89).

MEMO

You can select more than one sample in the Sample List

(found in screens such as the MULTISAMPLE MANAGER and

KBD SAMPLE) by tapping the check boxes at the far left of

each sample row. Select the check box in the topmost (title)

row to select or deselect all samples at once.

Check boxes selected for all samples

Check boxes selected for specific samples

Check boxes cleared for all samples

Editing Multisamples and Kbd Samples

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands