manualshive.com logo in svg

Roland FANTOM-06, Reference Manual

Share
Download
Roland FANTOM-06 Reference Manual Download Page 74

74

74

Using Scene Chain

Use the SCENE CHAIN function when you want to recall scenes in 

the order of the songs that you’ll be playing live.
A scene chain lets you specify the desired order of the scenes 

that you’ll be using, without changing the numbers of the scenes 

themselves. The order of scenes can be saved as a chain set, and by 

switching the chain set you can change the order of the scenes.

1 . 

Press the [CHAIN] button.

The SCENE CHAIN screen appears.

Name of the selected scene

Memo of the selected scene

2 . 

Touch the “CHAIN SET” name.

3 . 

Switch chain sets.

Menu

Explanation

[E4]

Scrolls up/down to select a chain set.

[E5] CANCEL

Cancels.

[E6] OK

Selects a chain set.

Parameter

Value

Explanation

CHAIN SET

001–100

Chain set number.

4 . 

Press a tone category button [1]–[16] to select a 

scene.

The 16 scenes arranged horizontally in the screen 

correspond to tone category buttons [1]–[16] respectively.

 

¹

You can also select a scene by directly touching a scene icon 

in the screen.

 

¹

You can also use the [INC] [DEC] buttons, [

ã

] [

â

] buttons, 

[VALUE] dial, and a pedal switch (p. 11) to select scenes.

 

¹

The icon of the selected scene is highlighted.

 

¹

Up to 512 scenes (16 x 32 pages) can be registered in a chain 

set. If more than 16 scenes are registered, a 

ã

 

â

 symbol is 

shown at each end of the scene icon in the screen. Touch the 

â

 (

ã

) symbol to switch to the next (previous) page.

Page number

Recalling Scenes in the Order of Songs 

(Scene Chain)

Summary of Contents for FANTOM-06































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands