Roland FANTOM-06 Reference Manual Download

Page: 26 / 190

Getting Ready

Making the Power Automatically Turn off After a

Time

(Auto Off)

The power to this unit will be turned off automatically after a

predetermined amount of time has passed since it was last used for

playing music, or its buttons or controls were operated (Auto Off

function).
If you do not want the power to be turned off automatically,

disengage the Auto Off function.

NOTE

Unsaved data is lost when the power turns off. Any data that

you want to keep must be saved in advance.

To restore power, turn the power on again.

Changing the Auto Off Setting

1 .

Press the [MENU] button.

The MENU screen appears.

2 .

Touch <SYSTEM>.

The SYSTEM screen appears.

3 .

Touch <GENERAL>.

4 .

Select “Auto Off” and change the setting.

Parameter

Value

Explanation

Auto Off

Off

The power will not turn off

automatically.

30min

The power will automatically turn off

if no operation is performed for 30

minutes.

240min

(default)

The power will automatically turn off

if no operation is performed for 240

minutes (four hours).

5 .

If you want to store the auto-off setting, press the

[WRITE] button in the System screen.

When the save operation is completed, the indication

“Completed” appears.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands