Roland FANTOM-06 Reference Manual Download

Page: 20 / 190

An Overview of FANTOM

About the Effects

The FANTOM is equipped with the following built-in effects, and settings can be made independently for each.

Effect type

Effect

Explanation

Tone effects

Multi-effect (MFX)

This is a general-purpose multi-effect that transforms the sound itself, giving it an

entirely different character. You can choose from 90 types as appropriate for your

needs.
These types include single effects such as distortion or flanger, as well as a variety of

other types.
Each tone has settings for one multi-effect.

DRUM KIT COMP

A drum kit can use six compressor units. These can be assigned to individual drum

instruments.
A drum kit can be assigned to all zones, but the six compressor units for a drum kit

apply only to the specified one zone (the zone specified by Drum Kit Comp Zone).

PARTIAL EQ

This is an equalizer that can be applied to each partial of tone.
You can independently adjust the high, mid, and low-frequency ranges.

KIT PARTIAL EQ (KIT PTL EQ)

This is an equalizer that can be applied to each drum inst.
You can independently adjust the high, mid, and low-frequency ranges.

Scene (Zone) effects

Zone EQ

This is an equalizer that can be applied to each zone.
You can independently adjust the high, mid, and low-frequency ranges.

Chorus

Chorus is an effect that adds depth and spaciousness to the sound.
This effect is common to all zones.

Reverb

Reverb is an effect that produces the reverberation that is characteristic of sounds

heard in a hall.
This effect is common to all zones.

Insert effect1 (IFX1)

These are general-purpose insert effects that can transform the sound itself, giving

it a completely different character.
There are 90 types, and you can select and use the type that’s appropriate for your

purpose. Use these when you want to apply a further effect in addition to the multi-

effect. The insert effects provide two independent effect units, IFX 1 and 2, and

you can make routing settings to connect IFX 1 and 2 in series or in parallel. These

effects are common to all zones.

Insert effect2 (IFX2)

System Effects

MASTER FX

Mastering Comp

The mastering compressor compresses sound that is louder than the specified

volume level, making the volume more consistent.
It can be adjusted independently for the high, mid, and low-frequency regions.

Mastering EQ

The mastering EQ is an equalizer that is applied to the entire sound engine of the

FANTOM.
You can independently adjust the high, mid, and low-frequency ranges.

Total Effect (TFX)

This is located after the mastering compressor and mastering EQ in the effects

chain. You can apply this multi-effect to the overall sound of the unit.

Effects applied to the

AUDIO INPUT jack

Low Cut

This cuts the unwanted low-frequency portion from the input sound of the AUDIO

INPUT jacks.

Vocoder

An effect that applies a human vocal character to the synth sound to produce a

sound like someone singing.

Noise Suppressor

Suppresses background noise during silence.

Input MFX (IN MFX)

You can sample sounds inputted through the AUDIO INPUT jack with the MFX

applied, or apply the MFX to instrument tones you are playing that do not use

effects.

Input EQ (EQ)

This equalizer is applied to the input sound from the AUDIO INPUT jacks.

Input Reverb (REV)

This reverb is applied to the input sound from the AUDIO INPUT jacks.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands