manualshive.com logo in svg

Roland FANTOM-06, Reference Manual

Share
Download
Roland FANTOM-06 Reference Manual Download Page 17

17

17

An Overview of FANTOM

Controller

Synthesizer

Sequencer

Sampler

Performance data

Keyboard

Slider

Wheel

Zone 1

Zone 2

Zone 3

Zone 4

Zone 16

Zone 10

Track 1

Track 2

Track 3

Track 4

Track 16

Track 10

Pedal

Audio signal

Pitch bend

Knob

Pad

Controller

This includes the keyboard, pads, pitch bend/modulation lever, 

wheels, panel knobs, sliders, and pedals connected to the rear 

panel. When you perform a performance operation such as pressing 

or releasing a key or pressing the damper pedal, the operation 

is converted into a MIDI message and transmitted to the sound 

engine and to an external MIDI device.

Synthesizer

This is the section that generates and modifies sound. In response 

to the performance data from the controller, it produces an audio 

signal that is output from the OUTPUT jacks and the PHONE jack.
This section produces sounds ranging from piano to organ, strings, 

lead synths and drums.

Sequencer

This lets you create patterns using a 16-track MIDI sequencer.
Tones of the 16 zones in the scene can be recorded directly using 

the 16 tracks. Realtime recording, step recording, and TR-REC are 

provided.
You can combine patterns to create groups, and place groups in a 

desired order to create a song.

Pattern

This is a unit of sequence data that records performance data for an 

individual tone. There can be up to eight patterns in one track. You 

can record up to 64 measures in one pattern.

Group

This records a combination of patterns for each track. You can 

create up to 16 groups in one scene.

Song

By placing groups in the desired order you can create a “song” that 

records that order. You can create one song in one scene.

Sampler

The sampler section lets you audio-record (sample) the sound of 

your keyboard performance or the input sound from an audio 

device or mic. The recorded pad sample can be played by pressing 

a pad.
This instrument features a built-in sampler that supports 

multisamples, whose sound can be heard via the sound engine.

Ø

 “05: Sampler” (p. 79)

Pad sample

This is a piece of sampled sound. For each pad sample, you can 

specify looping and other settings, and assign it to a pad.

Basic Structure

Broadly speaking, this unit consists of four sections: controller, synthesizer, sequencer, and sampler.

Controller

Sequencer

Synthesizer

Sampler

Summary of Contents for FANTOM-06































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands