Roland FANTOM-06 Reference Manual Download

Page: 162 / 190

162

File Utilities

These functions let you copy, delete, or move files that are saved in

internal storage or a USB flash drive.
For details on the folder structure of a USB flash drive, and the data

that is saved in the various folders, refer to “The folder structure of a

USB flash drive” (p. 160).

NOTE

The file utilities cannot handle files or folders that contain the

following characters.

Nor can special characters such as double-byte characters

be handled.

Take care not to inadvertently delete important data.

Do not modify the folder names that are listed in “The folder

structure of a USB flash drive”.

Note that if you modify a file name’s extension (the portion

such as .wav), functions such as import will no longer

recognize the files.

Basic Procedure for File Utilities

1 .

Press the [MENU] button.

The MENU screen appears.

2 .

Touch <FILE UTILITY>.

The FILE UTILITY screen appears.

3 .

Touch a tab in the upper part of the screen to

select USB flash drive or internal storage.

4 .

Select the file or folder for which you want to

execute an operation.

The selected file or folder is highlighted.
You can use the following operations when selecting a file or

folder.

Operation

Explanation

Touching a file or

folder name in the

screen

Directly selects the file or folder that you

touch.
By holding down the [SHIFT] button and

performing this operation, you can select

multiple files or folders.

[E1] knob

[

] button

[

] button

Scroll up/down to select a file or folder.
By holding down the [SHIFT] button and

performing this operation, you can select

multiple files or folders.

Operation

Explanation

[ENTER] button

Expands the contents of a folder. Press

once again to collapse the expanded

contents.

[

] button

Expands the contents of a folder to make

it visible.

[

] button

Collapses the expanded contents

[EXIT] button

Returns to the previous screen.

5 .

Use knobs [E2]–[E6] to select the operation that

you want to execute.

6 .

Change the settings as appropriate for the

selected menu item.

Menu

Explanation

[E2] RENAME

Renames a file or folder.

[E3] DELETE

Deletes a file or folder.

[E4] COPY

Copies a file or folder.

[E5] MOVE

Moves a file or folder.

[E6] CREATE FOLDER

Creates a new folder.

Renaming a File or Folder

(RENAME)

Here’s how to rename a file or folder.

1 .

In the FILE UTILITY screen, select the file or folder

that you want to rename, and then execute [E2]

RENAME.

The RENAME screen appears.

2 .

As described in the explanation of the RENAME

screen, rename the file or folder (p. 16).

3 .

Select [E6] OK.

If you decide to cancel, choose [E5] CANCEL.

NOTE

Never turn off the power or remove the USB flash drives while the

screen indicates “working”.

Deleting a File or Folder

(DELETE)

Here’s how to delete an unwanted file or folder.

1 .

In the FILE UTILITY screen, select file or folder that

you want to delete, and then execute [E3] DELETE.

A confirmation message appears.

2 .

Select [E5] OK.

If you decide to cancel, choose [E6] CANCEL.

NOTE

Never turn off the power or remove the USB flash drives while the

screen indicates “working”.

Convenient Functions

(File Utility)

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands