Roland FANTOM-06 Reference Manual Download Page 161

Page: 161 / 190

Convenient Functions (Utility)

161

Setting the Wallpaper

You can change the background image of screens like SCENE

SELECT or the edit screens.

1 .

Press the [MENU] button.

The MENU screen appears.

2 .

Touch <UTILITY>.

3 .

Touch <WALLPAPER>.

The setting screen appears.

4 .

Use the [VALUE] dial to select a wallpaper.

Menu

Explanation

[E2] Alpha

Adjusts the brightness of the wallpaper.

[E3] R

Adjusts the red hues of the wallpaper.

[E4] G

Adjusts the green hues of the wallpaper.

[E5] B

Adjusts the blue hues of the wallpaper.

5 .

Press the [EXIT] button to exit the screen.

The wallpaper settings are saved automatically.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands