Roland FANTOM-06 Reference Manual Download

Page: 159 / 190

Convenient Functions (Utility)

159

NOTE

Never turn off the power or remove the USB flash drives while the

screen indicates “working”.

7 .

Select [E6] CLOSE to return to the SCENE SELECT

screen.

Restoring Backup Data into the FANTOM

(RESTORE)

Here’s how to restore backup data into the FANTOM.

MEMO

Select the APPLY KBD SAMPLE check box when restoring to restore

all sample data assigned to the keyboard to their default state.

NOTE

When you execute the restore operation, all settings currently

saved in the FANTOM will disappear. If you want to keep the current

settings, back them up using a different name.

1 .

On the UTILITY screen, touch <RESTORE>.

The RESTORE screen appears.

2 .

Touch the file that you want to restore.

3 .

If you also want to restore the samples that are

assigned to the pads, select the [E2] APPLY PAD

SAMPLE check box.

If this check box is not selected, the samples that are

assigned to the pads are not restored.

4 .

To restore data including the Kbd Samples, select

the [E3] APPLY KBD SAMPLE check box.

5 .

Select [E6] RESTORE.

A confirmation message appears.
If you decide to cancel, choose [E6] CANCEL.

NOTE

If the “APPLY PAD SAMPLE”, “APPLY KBD SAMPLE” check box

is selected, an estimate of the required time is shown in the

confirmation screen. This estimated time is approximate, and will

not necessarily be precise. The actual time will vary depending

on the USB flash drive that you use and on the state of internal

memory.

6 .

To execute, select [E5] OK.

NOTE

Never turn off the power or remove the USB flash drives while the

screen indicates “working”.

7 .

When the message “Completed. Please Power

Off!” appears, turn the power off and then on

again (p. 25).

Formatting a USB Flash Drive

(USB MEMORY FORMAT)

Here’s how to format (initialize) a USB flash drive.

NOTE

Before using a USB flash drive with the FANTOM, you must

use this function to format it.

Use a commercially available USB flash drive. However, we

cannot guarantee that all commercially available USB flash

drives will work.

1 .

On the UTILITY screen, touch <USB MEMORY

FORMAT>.

The USB MEMORY FORMAT screen appears.

2 .

Select [E6] OK.

A confirmation message appears.
If you decide to cancel, choose [E6] CANCEL.

3 .

To execute, select [E5] OK.

NOTE

Never turn off the power or remove the USB flash drives while the

screen indicates “working”.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands