Roland FANTOM-06 Reference Manual Download

Page: 158 / 190

Convenient Functions (Utility)

158

Basic Utility Operations

1 .

Press the [MENU] button.

The MENU screen appears.

2 .

Touch <UTILITY>.

The UTILITY screen appears.

3 .

In the screen, touch the desired menu item.

4 .

Edit the settings for the menu item you selected.

Menu

Explanation

WAVE/EXPANSION

INFO

Checks the ratio of data used vs. memory

available, as well as information on the

installed expansions.

IMPORT

Shows the IMPORT MENU.

EXPORT

Shows the EXPORT MENU.

BACKUP

Backs-up user data and system data to a

USB flash drive.

RESTORE

Restores backed-up data into the FANTOM.

WALLPAPER

You can change the background image

of screens like SCENE SELECT or the edit

screens.

USB MEMORY

FORMAT

Initializes a USB flash drive.

FACTORY RESET

Restores the factory settings.

INTERNAL STORAGE

INITIALIZE

Returns the contents of internal storage to

the factory-set state.

USB MEMORY

UNMOUNT

Safely ejects the USB flash drive.

Backing Up User Data to a USB Flash Drive

(BACKUP)

Here’s how you can back up all settings stored in the FANTOM to a

USB flash drive.
The following settings are backed up.

User memory settings (e.g., scenes, user tones, user rhythm

groups)

System memory settings

MEMO

Select the INCLUDE KBD SAMPLE check box when doing a backup

to back up all sample data assigned to the keyboard.

NOTE

If you back up using the same file name as existing backup data on

the USB flash drive, that data is overwritten. If you want to make a

new backup, assign a different name.

1 .

On the UTILITY screen, touch <BACKUP>.

The BACKUP screen appears.

2 .

If you want the samples assigned to the pads to

be included in the backup, select the [E2] INCLUDE

PAD SAMPLE check box.

If this check box is not selected, the samples assigned to the

pads are not backed up.

3 .

To back up data including the Kbd Samples, select

the [E3] INCLUDE KBD SAMPLE check box.

4 .

If you want to rename the file that will be backed

up, select [E1] RENAME and assign a name

(p. 16).

By default, the file name is “MyBackup”.
When you have edited the name, select [E6] OK to close the

window.

5 .

Select [E6] OK.

A confirmation message appears.
If you decide to cancel, choose [E6] CANCEL.

6 .

To execute, select [E5] OK.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands