Roland FANTOM-06 Reference Manual Download

Page: 156 / 190

Convenient Functions (Utility)

156

9 .

If you want to edit the name of the file that is

saved, select [E1] RENAME and edit the name.

Enter a name as described in the explanation of the RENAME

screen. When you have finished editing the name, select [E6]

OK to close the window.

10 .

Select [E6] EXECUTE.

A confirmation message appears.
If you decide to cancel, select [E6] CANCEL.

11 .

Select [E5] OK.

The export is executed, and you return to the EXPORT MENU

screen.
The exported data is saved in the specified location as an

.svz file.

Exporting Scene Data

(EXPORT SCENE)

Here’s how to export this unit sound data (scenes) to a USB flash

drive.

MEMO

Data for the tones and drums used in the exported scenes is also

exported together.

1 .

Insert the USB flash drive into the FANTOM’s USB

MEMORY port.

2 .

Press the [MENU] button.

The MENU screen appears.

3 .

Touch <UTILITY>.

The UTILITY screen appears.

4 .

Touch <EXPORT>.

5 .

Touch <EXPORT SCENE>.

The EXPORT SCENE (SELECT SOURCE) screen appears.

Number marked / Number of items

6 .

Touch the box at the left of the scene(s) that you

want to export, adding a check mark.

Explanation

[E1]

Scrolls the cursor up or down.

[E2] CLEAR ALL

Clears all check marks.

[E3] SELECT ALL

Adds a check mark to all scenes.

[E6] NEXT

Proceeds to the next step.

Explanation

Hold down the

[SHIFT] button and

touch a check box

Adds a check mark to multiple scenes in

a single action, starting from the tone at

the cursor location to the tone that you

touched while holding down the [SHIFT]

button.

7 .

Select [E6] NEXT.

The EXPORT SCENE (SELECT DESTINATION) screen appears.

Explanation

[E1]

Scrolls the screen up/down to select the

save-destination.

[E2] RENAME

Edits the name of the file that is exported.

[E6] EXECUTE

Executes the export.

8 .

Use the [E1] knob to select the save-destination

folder.

9 .

If you want to edit the name of the file that is

saved, select [E2] RENAME and edit the name.

Enter a name as described in the explanation of the RENAME

screen.
When you have finished editing the name, select [E6] OK to

close the window.

10 .

Select [E6] EXECUTE.

A confirmation message appears.
If you decide to cancel, choose [E6] CANCEL.

11 .

Select [E5] OK.

The export is executed, and you return to the EXPORT MENU

screen.
The file is saved in the location that you specified in step 8.

Exporting Sample Data

(EXPORT SAMPLE)

This lets you export the FANTOM sample data to a USB flash drive.

1 .

Insert the USB flash drive into the USB MEMORY

port of the FANTOM.

2 .

Press the [MENU] button.

The MENU screen appears.

3 .

Touch <UTILITY>.

The UTILITY screen appears.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands