Roland FANTOM-06 Reference Manual Download

Page: 153 / 190

Convenient Functions (Utility)

153

MEMO

If you want to import a drum kit, touch <IMPORT DRUM>.

Explanation

[E1]

Scrolls the cursor up or down.

[E6] SELECT

Selects an .svz file.

8 .

Touch the .svz file that you want to import.

9 .

Select [E6] SELECT.

The IMPORT TONE (SELECT SOURCE) screen appears.

Number marked / Number of items

10 .

Touch the box at the left of each tone that you

want to import, adding a check mark.

Explanation

[E1]

Scrolls the cursor up or down.

[E2] CLEAR ALL

Clears all check marks.

[E3] SELECT ALL

Adds a check mark to all tones.

[E5] with SAMPLE

Select the corresponding check boxes to

include the Kbd samples on import.

[E6] NEXT

Proceeds to the next step.

Hold down the

[SHIFT] button and

touch a check box

Adds a check mark to multiple tones in

a single action, starting from the tone at

the cursor location to the tone that you

touched while holding down the [SHIFT]

button.

11 .

Select [E6] NEXT.

The IMPORT TONE (SELECT DESTINATION) screen appears.

This is a list of the user tones in the FANTOM.

Number marked / Number of items

Tones already imported

Tones used in a scene

12 .

Touch the box at the left of the import-destination

user tone (user drum kit) to add a check mark.

NOTE

The user tone(s) selected as the import-destination are overwritten.

13 .

Select [E6] EXECUTE.

A confirmation message appears.
If you decide to cancel, select [E6] CANCEL.

14 .

Select [E5] OK.

The import is executed, and you return to the IMPORT MENU

screen.

Importing Scene Data

(IMPORT SCENE)

Here’s how to import FANTOM sound data (scenes) from a USB flash

drive.

MEMO

The data that can be imported is the scene data that is exported by

the EXPORT SCENE function, but scenes can also be imported from

a backup file created by the BACKUP function.

1 .

Copy the files that you want to import (the folder

created by the EXPORT SCENE function) into the

USB flash drive.

2 .

Insert the USB flash drive into the FANTOM’s USB

MEMORY port.

3 .

Press the [MENU] button.

The MENU screen appears.

4 .

Touch <UTILITY>.

The UTILITY screen appears.

5 .

Touch <IMPORT>.

6 .

Touch <IMPORT SCENE>.

The folders and files on the USB flash drive are shown.

Number of scenes

in the folder

Explanation

[E1]

Scrolls the cursor up or down.

[E6] SELECT

Selects a file

7 .

Touch the file that you want to import (the folder

created by the EXPORT SCENE function).

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands