Roland FANTOM-06 Reference Manual Download Page 130

Page: 130 / 190

Recording a Pattern

130

Importing SMF as a Pattern

(IMPORT)

Here’s how SMF data can be imported as a pattern. The imported

SMF data can be handled as a pattern in the PATTERN screen.

MEMO

In advance, copy an SMF file from your computer to the desired

folder of a USB flash drive.

1 .

On the PTN UTILITY screen, select [E5] IMPORT.

The SMF IMPORT screen appears.
The import-destination can be a location that already

contains a pattern. In this case, the original pattern is

overwritten.

2 .

Select the SMF file that you want to import.

The selects file is highlighted. You can use the following

operations to select the file.

Operation

Explanation

Touching a file name

in the screen

Directly selects the file that you touched.

[E1] knob

[

] button [

] button

Scroll up/down to select a file.

[ENTER] button

Expands the contents of a folder. Press

once again to hide the expanded contents.

[

] button

Expands the contents of a folder.

[

] button

Hides the expanded contents.

[EXIT] button

Returns to the previous screen.

3 .

Select [E6] IMPORT.

The SMF IMPORT screen appears.

Menu

Explanation

[E1] Start

Specifies the starting measure of the SMF

to be imported.

[E2] Length

Specifies the number of measures of the

SMF to be imported.

[E3] Destination

Specifies the import-destination track.

[E4] EDIT NAME

Renames the pattern name after

importing.

4 .

Select [E6] OK.

The import executed and return to the PATTERN screen

when it is completed.
If you decide to cancel, choose [E5] CANCEL.

Exporting a Pattern as SMF

(EXPORT)

Here’s how a pattern of the currently selected scene can be

converted into SMF data and exported to a USB flash drive.

1 .

On the PTN UTILITY screen, select [E6] EXPORT.

The SEQ EXPORT screen appears.

2 .

On the upper left of the screen, touch <EXPORT

SOURCE> and select “PATTERN” as the source.

In addition to exporting an individual pattern, you can also

export by group or by song (p. 134) (p . 138).

3 .

On the upper left of the screen, touch <INCLUDE

PARAMETER> and select the parameters that will

be included in the exported data.

Parameter

Explanation

Tempo

Include the pattern’s tempo data in the

export.

Level

Include the pattern’s level data in the

export.

Pan

Include the pattern’s pan (stereo position)

data in the export.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Roland FANTOM-06, Reference Manual, Page: 130 / 190

Search results

Summary of Contents for FANTOM-06

Reviews: