Roland FANTOM-06 Reference Manual Download Page 102

Page: 102 / 190

Editing a Pad Sample

102

Exporting All Pad Samples in WAV Format

(EXPORT ALL WAV)

Here’s how all pad samples of BANK 1–4 can be exported in WAV

format.

1 .

On the SAMPLE PAD screen, touch <SAMPLE

UTILITY>.

The SAMPLE UTILITY window appears.

2 .

Select <EXPORT ALL (WAV)>.

A confirmation message appears.
If you decide to cancel, select [E6] CANCEL.

3 .

Select [E5] OK.

All samples are exported.

4 .

Select [E6] CLOSE to close the screen.

The exported WAV file is saved in the “EXPORT SAMPLE”

folder of the USB flash drive.

* If the export-destination contains a file of the same name, the

message “Duplicate File Name! Overwrite it?” appears. Select [E5]

OK to overwrite, or select [E6] CANCEL to cancel.

NOTE

Never turn off the power while data is being exported.

MEMO

The exported WAV file is 48 kHz 16-bit format.

Summary of Contents for FANTOM-06































































































































































































Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands

Roland FANTOM-06, Reference Manual

Search results

Summary of Contents for FANTOM-06

Reviews:

Related manuals for FANTOM-06

Brands by name

Popular brands