4
&
&
Panel descriptions
[Metronome] button
This sounds the metronome (p. 9).
To sound the metronome
Turn on the [Metronome] button.
To change the tempo
Turn on the [Metronome] button to display the
tempo, and then press the [–] [+] buttons.
To change the time signature
Hold down the [Metronome] button and press
the [–] [+] buttons.
Front Panel
Tone [Piano] and [Other] buttons
Use these buttons to select tones (p. 9) or adjust the manner in which they are sounded (p. 12).
To adjust the reverberation
Hold down the [Piano] button and press the
[–] [+] buttons.
To adjust the brightness
Hold down the [Other] button and press the
[–] [+] buttons.
To select grand piano and
ensemble tones
Press the [Piano] button. Press the [–] [+]
buttons to list and select them.
To select other tones
Press the [Other] button. Press the [–] [+]
buttons to list end select them.
To enable or disable Twin Piano
mode
Hold down [Piano] and press the [Other]
button.
[Split] button
This button allows you to split the keyboard in two halves:
the left half is then used to provide the Rhythm function with
chord information, while the right half allows you to play
[Transpose] button
This button is used to changed the pitch of the notes you
play on the keyboard and of the songs you play back (p. 10).
To change the key of
the keyboard and song
playback
Hold down the [Transpose]
button and press [–] [+] to set
the transpose interval.
To switch transpose off/on
Press the [Transpose] button.
[Split] + [Transpose] button: Function mode
Holding down [Split] while pressing [Transpose] allows you to
select the F-120R’s Function mode (p. 21).
[Volume] knob
This adjusts the volume.
