19
&
&
Recording
You can record your performances either in the internal memory or to
an optional USB memory.
You can play back a performance you have recorded to check what
and how you played, and play melodies on the keyboard along with
prerecorded accompaniment.
Getting ready to record
1.
Select the tone that you want to play (p . 9) .
2.
If you want to use a rhythm accompaniment, switch on
the [Rhythm] button and select the desired Rhythm (p . 15) .
3.
Sound the metronome if desired .
Press the [Metronome] button.
While the metronome is sounding, specify the tempo and time
signature of the song (p. 9). If you selected a Rhythm, the time
signature is fixed to the default setting of that Rhythm.
Entering recording-standby mode
4.
Press the [Rec] button .
The [Rec] indicator lights and the [Start/Stop] button flashes; the
F-120R will enter recording-standby mode.
Memo
If you decide not to record (i.e., if you want to exit recording-
standby mode), press the [Rec] button again.
Selecting the song number to record
5.
Press the [–] [+] buttons to select the song number (Song
01~Song 10;
ü01
~
ü10
/Song01~Song99;
s01
~
s99
)
that you want to record .
(Empty)
u01
Song 01
Ü01
A song with no recorded data (empty song)
• Song number shown with lowercase “
u
”
• No dot shown
A song with recorded data
• Song number shown with uppercase “
U
”
• Dot shown
If you inserted a USB memory and wish to store your recording
there:
(Empty)
s01
MYSONG01
Í01
A song with no recorded data (empty song)
• Song number shown with lowercase “
s
”
• No dot shown
A song with recorded data
• Song number shown with uppercase “
S
”
• Dot shown
Memo
Press [–] and [+] simultaneously to select the first empty
memory location of the active category (“U” or “S”).
Careful!
If you select a song that already contains data (song number
with an uppercase “U” or “S”) and record, the previous data
of the selected song number will be lost.
Note
The names of the songs you record (“Song 01” or “MYSONG 01”
in the example above) cannot be changed.
Starting recording
6.
Press the [Start/Stop] button .
A two-measure count will sound, and then recording will start.
During the count, measure numbers “
-2
” and then “
-1
” will
appear in the display.
If you don’t want a count to sound before recording
Recording will start automatically if you play the keyboard while
in recording-standby mode.
Stopping recording
7.
Press the [Start/Stop] button .
Recording will stop and a message will ask you whether you want
to save your song.
Save?
N Y
8.
Press the [+] button to select “Y” .
Saving will begin and the display will show the “Working” message.
If you don’t want to save your song, use the [–] button to select “N”.
Note
Never turn off the power or remove the USB memory while the
screen indicates “Working”.
Listening to the recorded song
After recording, you can press the [
] button to play back the
recorded song. For details on song playback methods, refer to
If you want to re-do the recording
You can repeat the procedure from step 1 on this page to re-record
at the same song number.
