manualshive.com logo in svg

Roland EDIROL PCR-300, Owner'S Manual, Page: 46 / 100

Share
Download
Roland EDIROL PCR-300 Owner'S Manual Download Page 46

 

46

 

Settings (Edit mode)

 

Here’s how to assign a control change message to a controller.

 

Basic editing (-> Advanced editing (p. 47))

 

fig.H-Edit.eps

 

1

 

Press the [EDIT] button so it’s lit.

 

fig.D-Edit.eps

 

The display will indicate “EDIT.”

 

fig.D-r1.eps

 

2

 

Slightly move the controller to which you want to assign a control 
change message.
If the controller is a button, press it.
The display will indicate the number of the controller you selected.

 

3

 

Check the indication in the display, then press the [ENTER] button.

 

fig.D-CC.eps

 

4

 

Turn the VALUE knob to make “CC” appear.

 

5

 

Press the [ENTER] button.

 

fig.D-CCEdit0.eps

 

6

 

Turn the VALUE knob or press controller [A1 (0)] to select the basic 
editing “CC0” indication.

 

fig.D-ChannelSelect.eps

 

7

 

Press the [ENTER] button.
The display will indicate “CH- -.”

 

* The - - portion shows the currently specified value.

 

8

 

Enter the channel.
Use the VALUE knob or controllers [A1 (0)]–[B2 (9)] to specify the desired channel.

 

fig.D-NoteSelect.eps

 

9

 

Press the [ENTER] button.
The display will indicate “N- - -.”

 

* The - - - portion shows the currently specified value.

 

10

 

Enter the control change number.
Use the VALUE knob or controllers [A1]–[A8] and [B1]–[B8] to specify the desired 
control number.

 

11

 

Press the [ENTER] button.

 

12

 

As appropriate for the type of controller, make button mode settings (p. 64) or 
virtual center click settings (p. 65).

 

Control change assign

 

Edit

Controller

Display

MIDI transmit 

channel

Control number

Value range

Port

Button mode

 

Basic editing

[A1 (0)]

1–16

0–127

(00–7FH)

0–127 (00–7FH)

PORT1 

(fixed)

Unlatch, Latch, 

Increase

Advanced editing 1

[A2 (1)]

1–16

0–127

(00–7FH)

You can specify an 

upper and lower limit

PORT1, 
PORT2, 

PORT1+2

Unlatch, Latch, 

Increase

Advanced editing 2

[A3 (2)]

1–16

0–127

(00–7FH)

Simulates a rotary 

encoder

PORT1, 
PORT2, 

PORT1+2

—

PCR-300_500_800_e.book 46 ページ ２００６年１２月１９日　火曜日　午後２時５９分

Summary of Contents for EDIROL PCR-300





































































































Reviews:

No comments