Chapter 3 Basic Operation
3-4 Pausing and Quitting Cutting
Chapter 3 Basic Operation
Chapter 3 Basic Operation
61
Quitting Cutting
This stops cutting through operation using the built-in panel. Unlike pausing operation, cutting cannot be
resumed.
Procedure
Press the PAUSE button during cutting.
Movement of the tool pauses. The PAUSE light
comes on and the READY light flashes. Rotation of
the spindle does not stop at this time.
Hold down the CANCEL button for two
seconds or longer.
When the PAUSE light goes dark and the READY
light is lighted, cutting has completed stopping.
Rotation of the spindle stops at this time.
