Roland Duo-Capture UA-11, Owner'S Manual

Page: 13 / 36

13
Driver Installation
Mac OS X
If you cannot select the DUO-CAPTURE, refer to “Using the DUO-CAPTURE” (p. 20).
If the DUO-CAPTURE is selected as the output device, the computer’s audio alerts will be
played using the DUO-CAPTURE; they will not be heard from the computer’s speakers.
If a dialog box requesting a password appears during installation, enter a computer
administrator’s user name and password and click the [Install Software] button or [OK]
button.
5. When “Welcome to the DUO-CAPTURE Driver installer” appears, click [Continue] .
6.
If the screen for selecting the installation destination appears, select the startup
disk and click [Continue] .
7.
When the installation type appears, click [Install] or [Upgrade] .
8. Click [Continue Installation] in the next screen .
9.
When the installation has finished, click [Restart] to restart the computer .
It may take some time for the computer to restart.
10. After the computer restarts, connect the
DUO-CAPTURE to the computer using a USB cable .
*
Turn down the volume on any peripheral devices before
connecting the USB cable .
11.
Open “System Preferences” and click [Sound] .
12. Click the [Output] tab and select [DUO-CAPTURE
44 .1kHz] .
“44.1kHz” is displayed after the product name when the
sample rate switch on the DUO-CAPTURE is set to “44.1kHz.”
13. When you have finished making these settings,
quit “System Preferences .”
Proceed to p. 14