38
DU2-64
DU2-54
Drying method
Heating type (with blower fan), Set temperature: 30 to 55°C (86 to 130° F) (*1)
Power requirements (*2)
AC 100 to 120V ± 10%, 5.5 A, 50/60 Hz
or AC 220 to 240 V ± 10%, 3 A, 50/60 Hz
AC 100 to 120V ± 10%, 5.0 A, 50/60 Hz or
AC 220 to 240 V ± 10%, 2.6 A, 50/60 Hz
Power consumption
Approx. 750 W
Approx. 670 W
Weight
26 kg (57 lb.)
24 kg (53 lb.)
Environment
During
operation
(*3)
Temperature: 15 to 32° C (59 to 90° F) (20° C (68° F) or higher recommended),
Humidity: 35 to 80% (no condensation)
Not
operating
Temperature: 5 to 40° C (41 to 104° F), Humidity: 20 to 80% (no condensation)
Included items
Power cord, power plug adapter, arms, bushings, cable clamps, stays, hexagonal
wrench, bolts, washers, User's Manual
*1
• Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
• Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
*2
• Be sure to connect the machine to an unshared electrical circuit.
*3
• Operating environment
Use in an operating
environment within this range.
*4
When this unit is used with a printer equipped with a cutting feature, no assurance is made with respect to the following
points. Refer to the user's manual included with the printer.
• Distance accuracy (when cutting)
• Repetition accuracy (when cutting)
• Alignment accuracy for printing and cutting
• Alignment accuracy for printing and cutting when reloading media
Specifications
