Roland DP90e, Owner'S Manual

Page: 34 / 68

Practicing
Audio Recording
Here’s how to record what you play on the unit as audio data. The recorded song can be used on your computer.
Preparing to record
1.
Connect a USB flash drive (sold separately) to the
USB memory port (p . 10) .
* Audio data cannot be saved in the unit itself.
2.
Select the tone that you want perform (p . 14) .
3.
While holding down the [ ] (Rec) button, press the [–] [+] buttons to select “Audio .”
4.
Press the [ ] (Rec) button .
The [ ] (Rec) button will light, the [ ] (Play/Stop) button will blink, and the unit will enter recording-standby mode.
If you decide not to record, press the [ ] (Rec) button once again.
5.
If desired, sound the metronome (p . 22) .
Starting/stopping recording
1.
Press the [ ] (Play/Stop) button .
Recording will start.
When recording starts, the [
] (Rec) button and [ ] (Play/Stop) button
will light.
NOTE
Never turn off the power or disconnect the USB flash drive during recording.
2.
Press the [ ] (Play/Stop) button .
Recording will stop, and a confirmation message will ask whether you want to save the recording.
3.
Either save the performance or erase it (p . 30) .
4
3
1 2
34