58
Various Settings
The DP990F may be unable to correctly recognize the type
of CD being used. In such instances, you can specify the type
of CD manually.
* Note that some commercial player piano CDs cannot be
played back on the DP990F.
The settings you edit in Function mode will return to their
factory-set values when you turn off the power, but the
“Memory Backup” function lets you store these settings so
that they will not change even when you turn off the power.
1. Enter Function mode, choose
2.
To store the settings, press the
[
] button.
A confirmation message will appear.
If you decide to cancel, press the
[
] button.
3.
To execute the operation, press
the [
] button.
When the memory backup has been
completed, the display will indicate
“Fnc.”
Never turn off the power while the settings are being
stored.
For details on the items that are stored, refer to
“Parameters Stored in Memory Backup” (p. 79).
When you execute the “Factory Reset” function, the settings
you’ve edited in Function mode will be restored to their
factory-set state. Execute this function when you want the
settings you saved using the Memory Backup function to be
restored to the state they were in when you purchased the
DP990F.
When you execute “Factory Reset,” all stored settings
will be erased and returned to the factory settings.
This function will not erase the songs from internal
memory or external memory such as separately sold
USB memory.
If you want to erase internal memory or external
memory such as USB memory, refer to “Initializing the
Memory” (p. 60).
1. Enter Function mode, choose
2.
To execute Factory Reset, press
the [
] button.
A confirmation message will appear.
If you decide to cancel, press the
[
] button.
3.
If you’re sure you want to execute, press the [
]
button.
The factory reset will be executed.
When the Factory Reset has been
completed, the following display
will appear.
Never turn off the power while the Factory Reset is
being executed.
4.
Turn the power off, and then on again (p. 18).
Setting the Type of CD To be
Played Back (CD/Audio Type)
Setting
Description
Auto
The CD type is detected automatically
Type A
General CDs for Player Piano contain audio and
MIDI data, and the data format may vary from one
CD to the next. If the CD’s data format does not
match the DP990F’s settings, a “beep” will sound.
Certain general Piano player CDs may not be
playable on the DP990F.
Type B
Stereo
Commercial Audio CD
(CDs other than those designed for use with the
player piano)
Storing Your Settings
(Memory Backup)
Restoring the Factory Settings
(Factory Reset)
DP990F_e.book 58 ページ ２０１０年１月１４日 木曜日 午後１１時２９分
