background image

 

Owner’s Manual

 

Thank you, and congratulations on your choice of the Roland

 

 CUBE-20X 

 

Guitar Amplifier.

Additionally, in order to feel assured that you have gained a good grasp of every 
feature provided by your new unit, Owner’s manual should be read in its entirety. 
The manual should be saved and kept on hand as a convenient reference.

 

Main Features

Before using this unit, carefully read the sections entitled

•IMPORTANT SAFETY INSTRUCTIONS (page 2)

•USING THE UNIT SAFELY (page 3–5)

•IMPORTANT NOTES (page 5)

 

Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the 
written permission of ROLAND CORPORATION.

 

• 20-watt output, high-performance, DSP guitar amp with built-in 20 cm (8-inch) 

speaker.

• The “LEAD” offers six different COSM pedal effects: ACOUSTIC, OVERDRIVE, 

DISTORTION, METAL, METAL STACK, and TUBE DRIVE.

Composite Object Sound Modeling (

 

COSM

 

) is Roland’s innovative and powerful 

sound modeling technology. COSM analyzes the many factors that make up the 
original sound, such as the electrical and physical characteristics of the original, 
and then produces a digital model that can reproduce the same sound.

• Channels can be switched between CLEAN and LEAD. Channel switching can be 

done via optional footswitch.

• The CUBE-20X includes Roland’s Power Squeezer function. This feature enables 

you to reduce the maximum output from 20 watts to 2 watts at the press of a single 
button. When switched on, Power Squeezer reproduces the distortion of a fully-
cranked power amp along with a great sound, regardless of the volume level, but 
with a 2-watt output that is easy to handle in the home.

• A tuner function is also included. This feature allows you to tune your guitar 

while the instrument is connected to the CUBE-20X.

• Includes easy-to-use, three-band equalizer (Bass/Middle/Treble).

• Onboard EFX section includes 4 types of digital effect, chorus, flanger, phaser and 

tremolo; footswitch (optional) can be used to switch EFX on and off.

• Separate “Delay” and “Reverb” effects provided in addition to the EFX.

• Equipped with “RECORDING OUT jack” convenient for use in recording and for 

use as headphone out.

• The unit is equipped with an external input jack, which is convenient for your 

practice sessions. Use this to play along with sounds from CD players and MP3 
players.

CUBE-20X_e.book 1 ページ 2006年7月24日 月曜日 午後2時11分

Summary of Contents for CUBE-20x













Reviews: